the course of a boundary line is the direction in which the boundary line travels

Full Answer

What is the definition of a boundary line?

A boundary line is a line along which two areas meet. A boundary line between privately owned parcels of land is usually termed a property line. A boundary line between political entities (such as counties, states, or countries) is usually termed a political boundary.

Where does the boundary line run along the coast?

As a rule, on the Atlantic and Pacific coasts, the Boundary Line generally follows the high water shoreline, extended across the entrances to small bays, inlets, harbors, rivers, the ends of breakwaters or jetties, etc.

What is the boundary line in New England waters?

In New England waters, the Boundary Line follows a series of lights and offshore buoys from West Quoddy Head Light (at the U.S./Canadian border) to Race Point Light (at the tip of Cape Cod). Like the Gulf of Mexico, this also creates a coastwise corridor inside of which all vessels may operate without a load line.

What is the difference between a property line and political boundary?

A boundary line between privately owned parcels of land is usually termed a property line. A boundary line between political entities (such as counties, states, or countries) is usually termed a political boundary.

What is the starting point called in a metes and bounds description?

A metes and bounds legal description starts from a point of beginning (POB). After the POB, the legal description traces the outline of the property's boundary lines until there is closure in the legal description.

What is the area between meridians?

The north-south area between consecutive meridians is called a range. The area labeled "B" in the exhibit is a range. A range is identified by its relationship to the principal meridian. All ranges are six miles wide.

What terms are included in every metes and bounds?

A metes and bounds description starts at a well-marked point of beginning (POB) and establishes the boundaries of the parcel by courses and metes (length in inches, feet, yards, miles) and bounds (directions based on landmarks, monuments, angles) and returns to the true point of beginning.

Which legal description method uses compass headings and directions?

Compass headings and directions The metes and bounds system uses compass headings and directions.

Why longitudes are called meridians?

Longitudes are known as meridians because in Geographical sense, meridians are great circles which are not parallel to each other but intersect each other at the North and the South Poles. Same stands true of the longitudes. All longitudes are great circles which meet at the Poles.

What is parallel and meridian?

These imaginary lines running east-west are commonly known as the parallels of latitude. The vertical lines running north-south, join the two poles. They are called the meridians of longitude. They are spaced farthest apart at the equator and converge at a point at each pole.

What is meaning of metes and bounds?

metes and bounds, limits or boundaries of a tract of land as identified by natural landmarks, such as rivers, or by man-made structures, such as roads, or by stakes or other markers.

How are directions described in a metes and bounds survey?

How are directions described in a metes and bounds survey? D) It's written by a surveyor. What is a "block" in the lot and block system of description? Accurately locates and identifies the boundaries of the property and distinguishes it from all other properties.

Which of the following is defined as the direction and distance of a line forming the boundary of a property?

Metes refers to a boundary defined by the measurement of each straight run, specified by a distance between the terminal points, and an orientation or direction. A direction may be a simple compass bearing or a precise orientation determined by accurate survey methods.

WHAT IS A Guide meridian?

Definition of guide meridian : a line that is marked by monuments, that runs north and south between other more carefully established meridians, and that is used for reference in surveying.

What determines the east and west boundaries in a government survey?

From the fixed Point of Beginning, lines are drawn about every six miles on both sides of the baseline, and every six miles on both sides of the meridian line. The lines running east to west are called “tiers”, and the lines running north to south are known as “range lines”.

How do you read a surveying compass?

When the north point of the compass-box is toward the point whose bearing is desired, read the north end of the needle. When the south point of the box is toward the point, read the south end of the needle. If a bearing of the line is taken looking in the opposite direction, it is called the “reverse bearing”.

What is boundary line in math?

Boundary lines in math are the same: they identify the outer edge (or outline) of a shape or area. This could be a geometric shape or an inequality graph. Each of these mathematical concepts includes a boundary line. Let's look at each in turn to get a better understanding of boundary lines and how they work. 4:41.

Why is the boundary line in an inequality dotted?

This is because the mathematical sentence tells us that the solution is less than x + 1. So therefore, the boundary line in an inequality shows the line past which solutions do not appear.

What does it mean to enroll in a course?

Enrolling in a course lets you earn progress by passing quizzes and exams.

When you graph an equation, do you get a line?

When you graph an equation, you get a line. Right? Yes, if it is a true equation with an equal sign the graph will result in a line of some sort. For example, the equation y = x will be a straight line stretching from the bottom right to the top left corners of the graph, like this:

Do solution points cross the boundary line?

Still, the solution points do not cross the boundary line and because the solution (inequality direction) is greater than, the shaded part is above the line. Lesson Summary. Let's review. In this lesson, we saw that a boundary line is the outer edge of a shape or area and that the perimeter is a boundary line measure commonly used with shapes.

What happens when a pulse crosses the boundary from a more dense medium to a less dense medium?

In the case of a pulse crossing the boundary from a less dense medium into a more dense medium, the speed and the wavelength are both decreased. On the other hand, if a pulse crosses the boundary from a more dense medium into a less dense medium, the speed and the wavelength are both increased.

What happens when you reach the boundary of a thin rope?

Upon reaching the boundary, two behaviors will occur. A portion of the energy carried by the incident pulse is reflected and returns towards the left end of the thin rope. The disturbance that returns to the left after bouncing off the boundary is known as the reflected pulse.

What happens to a wave when it reaches the end of the medium?

A wave doesn't just stop when it reaches the end of the medium. Rather, a wave will undergo certain behaviors when it encounters the end of the medium. Specifically, there will be some reflection off the boundary and some transmission into the new medium. The transmitted wave undergoes refraction (or bending) if it approaches the boundary at an angle. If the boundary is merely an obstacle implanted within the medium, and if the dimensions of the obstacle are smaller than the wavelength of the wave, then there will be very noticeable diffraction of the wave around the object. The reflection, refraction, and diffraction of waves were first introduced in Unit 10 of The Physics Classroom tutorial. In Unit 11 of The Physics Classroom Tutorial, the reflection, refraction, and diffraction of sound waves was discussed. Since light is a wave, it too will undergo these same behaviors when it reaches a boundary between two media. The boundary behavior of light waves has already been introduced in Unit 12 of The Physics Classroom Tutorial. In this unit, we will focus on the refraction of light in great detail. We will explore the conceptual and mathematical principles governing the bending of waves as they cross the boundary between two media. To understand light refraction, we will need to back up a few steps and investigate the behavior of waves when they reach the end of a medium.

How does a light wave behave?

First, the light wave behaves like the wave on the rope: a portion of the wave is transmitted into the new medium (glass) and a portion of the wave reflects off the air-glass boundary. Second, the same wave property changes that were observed for the wave on the rope are also observed for the light wave passing from air into glass;

What is the term for the bending of the path of light?

This bending of the path of light is known as refraction . A one-word synonym for refraction is bending.

Is refraction a boundary behavior?

For this reason, refraction is called a boundary behavior. A ray is drawn perpendicular to the wavefronts; this ray represents the direction that the light wave is traveling. Observe that the ray is a straight line inside of each of the two media, but bends at the boundary. Again, refraction is a boundary behavior.

What is the legal method of describing the boundary lines of a parcel of real property?

A method of legal description that outlines the boundary lines of a parcel of real property by establishing a starting point called the point of beginning and describing the course and distance each boundary line travels from that point around the perimeters of the property until returning to the point of beginning.

Which direction are imaginary lines located?

Imaginary lines located at each six-mile interval running in an east-west direction parallel to a base line.

What is a readily identifiable point?

A readily identifiable point that is the starting point of a metes and bounds legal description of the subject real property.

What is irregular land?

An irregular-sized tract of land labeled by government surveyors.

What is the analogy of a light wave crossing two boundaries?

In effect, this analogy would be representative of a light wave crossing two boundaries. At the first boundary (the asphalt to grass boundary), the light wave (or the tractor) would be slowing down; and at the second boundary (the grass to asphalt boundary), the light wave (or the tractor) would be speeding up.

What is the direction of light traveling when entering a rectangular block of glass?

Put another way, the direction at which the light is traveling when entering the rectangular block of glass is the same as the direction that the light travels after exiting the rectangular block of glass. There is no ultimate change in the direction that the light is traveling.

What is the optimal entry point into the water?

The optimal entry point into the water is the point that would allow the lifeguard to reach the drowning swimmer in the least amount of time. Obviously, this point would be at a location closer to the swimmer than to the guard. The diagram below depicts such an entry point.

What direction does light ray refract?

The light ray refracts towards the normal upon entering the glass (crossing from a fast to a slow medium) and refracts away from the normal upon exiting the glass (crossing from a slow to a fast medium). This is shown in the diagram at the right.

What is the path of a tractor?

The path of the tractor is closer to the normal in the slower medium and farther away from the normal in the faster medium. This analogy can be extended to the path of a light wave as it passes from air into and out of a rectangular block of glass.

What happens when you exit the plot of grass?

Upon entering the grass, the tractors' wheels will sink into the surface and slow down. Upon exiting the plot of grass on the opposite side, the tractor wheels will speed up and achieve their original speed. In effect, this analogy would be representative of a light wave crossing two boundaries.

How does light travel from a slow to a fast medium?

Light Traveling from a Slow to a Fast Medium If a ray of light passes across the boundary from a material in which it travels slowly into a material in which travels faster , then the light ray will bend away from the normal line.