course is 14x1.5 fine is 14x2.0 Compare any diameter metric bolt with a 1.5 and 2.0 pitch then look at the stud.
Full Answer
The front locking hub on F250 works by attaching and detaching the front axles. When not locked in, the front wheels axles work separately and only allow rear wheels to spin. When locked, the van is on 4WD. The rear wheels will also get power directly from the engines and work on a vacuum-actuated system.
The primary function of the front locking hub on F250 is to turn the vehicle on 2WD or 4WD when necessary.
The front locking hub works by making 2 wheels drive into 4 wheel drive.
Ford still has to lock hubs to allow the customer to choose between auto and manual locking hubs. Heavy-duty vans like F250 are on off roads on snow or sands. They are primarily used as work trucks. If the car is in a vacuum-actuated system, the 2WD will not be able to work. It will fail to move forward.
In automatic lock hubs, Ford F250 will lock itself. You will apply torque with the help of the driveshaft. It will force the hub to slide in. Thus, you can lock Ford F250 hubs.
You can replace the locking hubs on the Ford F50. For this, you will need –
The Ford vehicles now come with auto front locking hubs. But the model from 2005 to 2020 allows you to upgrade it to manual locking hubs.