Dec 23, 2021 · Step 2: Setting Up Hyper-V. Ensure that hardware virtualization support is turned on in the BIOS settings. Save the BIOS settings and boot up the machine normally. Click the search icon (magnified glass) on the taskbar. Type turn windows features on or off and select that item. Select and enable Hyper-V.
Best Answer 1. Which of the following network interface configurations are recommended by Microsoft in a Hyper‐V server? A. Two physical adapters providing multiple virtual adapters B. One physical adapter per Hyper‐V server, providing for several network and SAN connections C. One physical adapter per partition, providing for multiple network connections per partition D.
The VLAN identification configuration option is valid on which of the following Hyper-V virtual networks? (Choose all that apply.) internal ... If you need your VM to access Fibre Channel storage directly, what type of adapter must be used? Fibre Channel. Hyper-V considers one read I/O operation to be how much data? 8KB. When you create a ...
Question #: 12. Topic #: 1. [All CWNA-107 Questions] You are implementing a VHT-capable AP. Which one of the following channels is available in the 802.11-2016 standard that was not available before the ratification of 802.11 ac? A. 153. B. 161.
MPIO on the server running Hyper-V You can install multiple virtual Fibre Channel ports on the server running Hyper-V, and then use MPIO to provide high availability to the LUNs that are accessible by the server.
To add a virtual Fibre Channel adapter and connect it to a vSAN. On the Windows Start screen, click Server Manager. Click Tools, and then click Hyper-V Manager. On the Hyper-V Manager screen, click the name of the desired virtual machine under Virtual Machines. In the Action pane, click Settings.
To create a virtual SAN. On the Windows Start screen, click Server Manager. Click Tools, and then click Hyper-V Manager. In the Action pane, click Virtual SAN Manager. To create a new vSAN, click Create. In the Name text box, type the name for your new vSAN.
Virtual Fibre Channel for Hyper-V provides the guest operating system with unmediated access to a SAN by using a standard World Wide Name (WWN) associated with a virtual machine. Hyper-V users can now use Fibre Channel SANs to virtualize workloads that require direct access to SAN logical unit numbers (LUNs). Fibre Channel SANs also allow you to operate in new scenarios, such as running the Failover Clustering feature inside the guest operating system of a virtual machine connected to shared Fibre Channel storage.
Hyper-V allows you to define virtual SANs on the host to accommodate scenarios where a single Hyper-V host is connected to different SANs through multiple Fibre Channel ports. A virtual SAN defines a named group of physical Fibre Channel ports that are connected to the same physical SAN. For example, assume that a Hyper-V host is connected to two SANs—a production SAN and a test SAN. The host is connected to each SAN through two physical Fibre Channel ports. In this example, you might configure two virtual SANs—one named “Production SAN” that has the two physical Fibre Channel ports connected to the production SAN and one named “Test SAN” that has two physical Fibre Channel ports connected to the test SAN. You can use the same technique to name two separate paths to a single storage target.
Hyper-V in Windows Server 2012 can use the multipath I/O (MPIO) functionality to ensure continuous connectivity to Fibre Channel storage from within a virtual machine. You can use MPIO functionality with Fibre Channel in the following ways:
When the virtual machine stops running on the host, the NPIV port is removed. Due to the use of NPIV, the HBA ports used for virtual Fibre Channel should be set up in a Fibre Channel topology that supports NPIV, and the SAN should support NPIV ports.
Hyper-V requires a computer with processor support for hardware virtualization. A computer with one or more Fibre Channel host bus adapters (HBAs) that have an updated HBA driver that supports virtual Fibre Channel. Updated HBA drivers are included with the in-box HBA drivers for some models.
The HBA ports to be used with virtual Fibre Channel should be set up in a Fibre Channel topology that supports NPIV, a maximum transfer size of at least 0.5MB, and data transfers of at least 128 physical pages. To determine whether your hardware supports virtual Fibre Channel, contact your hardware vendor or OEM.
You can use MPIO functionality with Fibre Channel in the following ways: Use MPIO for host access. Install multiple Fibre Channel ports on the host, and use MPIO to provide highly available connectivity to the LUNs accessible by the host. Virtualize workloads that use MPIO.