how to make rc rock crawler course

Use the wooden stumps and palettes to create a rough outline of the pathway of the course. You can also use wood to make bridges and ramps. If you make bridges, make sure you use rope and glue to reinforce them.

Full Answer

How to build an RC rock crawler?

How To Build An RC Rock Crawler Course (Step by Step Guide) 1 Supplies and materials needed. A good strong wagon, a wheelbarrow, or a small utility trailer for an ATV to help you haul dirt, rocks, gravel, and other things like that. 2 The Building Process. ... 3 2 Tips to Keep in Mind. ... 4 Conclusion. ...

What makes a great rock crawling course?

Here are some tips for making a great rock crawling course. 1. KISS. You’ve probable heard of Keep It Simple, Stupid. While creativity is important (more on that later), it is important to keep your courses simple. That doesn’t mean boring or easy. I’ll explain.

What are the rules of rock crawling?

Basic rules Unlike traditional RC racing, rock crawling is a judged competition, and points are added for penalties. Like golf, the lowest score wins. Except for the starting and finishing gates, each gate successfully cleared is worth a “-1” point; a maximum score of 40 is allowed per course, and it is possible to have a negative score.

What is rock crawling racing?

Sometimes multiple courses are run at once, so make sure you know where you have to be. Rock crawling is a judged competition. Each course will have a judge and usually an assistant. Unlike traditional RC racing, rock crawling is a judged competition, and points are added for penalties.

What happens at rock crawling comps?

At a rock crawling comp, with everyone walking around on rocks, there the possibility someone could get hurt, but don’t make it a sure thing by designing a course that forces drivers to be in precarious positions. Realize that a competitor will be far more focused on his vehicle than he will be on his footing.

Why is the same course good for beginners?

The same course is also good for beginners because with an easier first gate, a moderate second gate and so on, they will make progress.

Can a course layout be long or short?

How a driver is expected to progress from one gate to another should be readily apparent. Courses can be long or short with small or large distances between gates, but the “flow” from the start to the final gate should be clear.

Introduction

If you have an RC Rock Crawler, chances are you’ve always thought about a course. But when it came to designing and making it, did you get lost?

Where Can You Make The Course?

The amount of space can be a determining factor for you while deciding about the location. Don’t let this overwhelm you. Be it outdoors or indoors, we’ve got the right ideas for you.

Set The Courses Up!

This is fairly straightforward. But, you need to think and consider some things before you get going.

Test Drive And Adjust

All that is left now is to assemble the parts you have made and give the crawler a run. Make sure if you make bridges, they can support the car.

Wrapping Up

Well, you have made it to the end. We hope this article helps you come up with unique RC rock Crawler Course ideas.

Step 1: The Goal

Since I will only be designing and constructing the chassis for the rock crawler, I needed a base to build off of. That is where the Axial AX-10 Deadbolt Or the Axial Wraith come in. The AX-10 deadbolt and the Wraith are commercially available RC rock crawlers that are very capable in terms of trailing and light rock crawling.

Step 2: The Parts and Materials Used

To begin our build, we will need some simple parts from local stores around your area, as well as the parts from your axial AX-10 Deadbolt or Wraith. since these two trucks use the same axles, shocks, and transmission, which truck you start out with doesn't really matter, because these are the parts we will be using.

Step 3: The Tools

We will need very simple tools for this build. The cutting boards (or Delrin) are fairly soft materials, but with a lot of strengths when braced and assembled properly.

Step 4: The Theory

Now comes the design of the chassis itself. do design the chassis, we first need to look at what makes a successful rock crawler chassis.

Step 5: The Design

With our goal and theories in mind, we can start the design. My personal idea was to have the ability to use full stick packs, such as a 5000mah 2 cell lipo in my crawler for longer run times, while still being able to use a smaller battery out front to help with more challenging sections and competition courses.

Step 6: The Design Part 2

Included here are a photo of the plans for the chassis of the crawler, as well as the other pieces used in construction.

Step 7: Cutting and Drilling the Chassis

This is by far the most labor intensive part of this build, the cutting. As mentioned before, this is a very tough material and is relatively difficult to cut by hand. however this stuff also has a very low melting temperature, which means that any high-speed tool (Sawzall, etc.) will just melt the plastic.

What size rims do RC rock crawlers use?

Most of the clubs around the country abide by the USRCCA rules and have 2.2 and Super classes. The trucks in the 2.2 class have 2.2 size rims and aren’t allowed to run rear steer or a wheelbase over 12.5 inches. They must also be less than 12.5 inches wide. The Super class has less restrictions and use larger bodies and tires. Some clubs around the country also use a scale class, in which the goal is to mimic full size street legal rigs. Overall, the 2.2 class is the most popular, but most large clubs run every class with strong turnouts.

How many points do you get for rock crawling?

Unlike traditional RC racing, rock crawling is a judged competition, and points are added for penalties. Like golf, the lowest score wins. Except for the starting and finishing gates, each gate successfully cleared is worth a “-1” point; a maximum score of 40 is allowed per course, and it is possible to have a negative score. The most common penalty is for using reverse, but you can also get penalties for having to roll your vehicle over and for hitting gates. There are often time limits for each course and exceeding the time limit will result in a Did Not Finish (DNF). Any time you have to touch your vehicle (for a repair, by accident or to reposition it other than for a simple roll over) it is deemed a touch penalty and it will cost you 10 points. In addition, when a touch penalty occurs, your rig must be placed with its rear axle at the last gate you cleared. Roll overs are only worth five points, but you must only simply roll the vehicle back over to either side. You can not pick it up and place it back on all four tires.

Do you need to check out a rock crawling competition?

Competitions, however, take it to a whole new level. If you really want to up your game and have some serious fun, you need to check out a rock crawling competition. You’ll also meet people who are as into rock crawling as you, and you’ll almost certainly find the rock crawling crowd to be very inviting and helpful.

Is pre-running a course against the rules?

Actually pre-running a course is against the rules, but you absolutely must study each course ahead of time and pick out your line. Also, look for alternative routes and optional lines—you might need them if things don’t go according to plan. – Scope out the competition.

Is rock crawling fun?

Going to a rock crawling competition is all about having fun, but if you’re not prepared, what should be a fun day of crawling on the rocks can turn into a long, grueling day. Here are some basic survival tips to help get you through the day and ensure you have a good time: