How do golf courses keep grass green? The answer lies in a combination of regular maintenance and the use of specialized turfgrass. Most golf courses have a staff of groundskeepers who mow, fertilize, and water the grass on a daily basis.
Creating and maintaining a golf course – even just a putting area – is best left to the professionals! Frequent, measured, irrigation, mowing and topdressing with sand help the putting greens to be smooth. Credit: CSSA files So how do golf courses make the grass surface so smooth?
The addition of sand, both firms and smooths the green surface allowing for consistent roll and speed. Every spring we apply pre-emergent herbicides in combination with fertilizer to ensure high quality weed-free roughs and green surrounds.
Golf courses utilise this technique, which is how they get the grass to look like a carpet. Once you reseed, apply a high-quality fertilizer within 48 hours. Make sure you water your lawn well at this time. The most common type of fertilizer is granulated, but water-soluble fertilizers are also available.
Aside from divot repairs and pitch mark repairs, all golf greens become worn when played on and need to be regularly renovated in order to bring the surface back to a suitable quality. This helps to create a dense, smooth and fine sward which makes provides a superior playing surface.
Trim Mower – Trim mowers are designed to mow around obstacles on the golf course such as bunkers, trees, greens complexes, and water features.
0:362:00Fore The Golfer: Making a Great Putting Surface - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe harmful effects of the thousands of footprints that compact the soil each golfing. SeasonMoreThe harmful effects of the thousands of footprints that compact the soil each golfing. Season fertilizer and plant protectants have been applied as needed to keep the plant growing.
Golf Course Fertilizer is thought to be special; however, it has the same NPK (nitrogen, phosphorus, potassium) that most low-cost plant fertilizers contain. In reality, there is nothing special about golf course fertilizer.
0:041:39USGA Putting Green Construction Recommendations - YouTubeYouTubeStart of suggested clipEnd of suggested clipBuilding the specified putting green site and cavity in layers to prevent air pockets from formingMoreBuilding the specified putting green site and cavity in layers to prevent air pockets from forming that could settle and distort the architects.
How often putting greens are mowed is dependent on staff size and budget, but grass type and weather also play a role. On average, greens are mowed at least five days per week, and in most cases six or seven days per week.
every two to three daysIt's better to water “deeply and infrequently,” Cutler says. About a third of an inch every two to three days is a good goal.
Golf courses also adhere to a regular schedule of applying pre-emergent herbicides as well as weed killers and fertilizer. The key behind pre-emergent herbicides is weed prevention. Of course there are no “magic bullets” that keep all weeds out for the entire growing season.
0.125-inchToday's putting greens typically are maintained at or below a 0.125-inch height of cut – i.e., one eighth of an inch. To better appreciate how low that really is, two quarters stacked on top of each other would be slightly higher than 0.125 inch.
Golf greens that have been established two or more years generally require 3 to 6 lb. N/1,000 square feet per year. Young greens in full sun with high traffic will require the higher amounts of nitrogen. Tees and fairways require from 2 to 4 and 1 to 3 lb.
between $11 and $25 per square footPutting Green Installation Expect to pay between $11 and $25 per square foot to have a backyard putting green installed. This pricing could change based on size. The larger your golf green, the less you'll pay per square foot; most contractors lower their rates for bigger projects.
1. Golf Courses & Sports Fields. Silica sand is used for bunkers and greens on golf courses, as well as for natural and synthetic sports fields. Those sand traps you find yourself stuck in way too often when you're playing eighteen are usually full of silica sand.
There are two basic ways an architect can get water to go where it needs to go: with the slopes of the land, or through manmade drainage systems. In a perfect world, golf courses would use only surface drainage, in which the land moves water off the playing surfaces and into streams and other basins.
The putting green, or simply ‘the green’, refers to the section of a golf course where the hole and the flagstick are located. This part of the course is typically oval-shaped and is specifically designed for putting.
When selecting the best golf course putting green grass, you should factor in the blade texture and whether the grass can withstand being mowed low. Some of the best grass types for a golf course putting green include bentgrass, Bermuda grass, perennial ryegrass, fescue grass, Poa annua, and Zoysia grass.
You can successfully grow fairway grass at home provided you adopt the correct planting and maintenance practices. Fairway grass varieties are usually low growing types, as golf turfs have to be mowed low. Common low-growing turfgrasses used on golf fairways include Bermuda grass and bentgrass.
Mowing. Golf courses use advanced mowing technology with machines that use reels to cut the grass. Think of a pair of scissors that cleanly cut the grass using a reel and bedknife. Most home mowers rely on a rotary system that spins a single blade (or double blades for lawn tractors) with a sharpened edge at a high speed.
The key to having a course-quality lawn is a basic understanding of the fundamentals of lawn care. Each lawn is unique, so it’s important that you understand your particular lawn. Let’s dive in...
Dethatch and aerate. Often overlooked and vitally important are two key steps to excellent lawn care: dethatching and aerating. Dethatching is the process of removing dead grass from the turf. Aerating is the process of puncturing the turf, allowing the soil to loosen and oxygen to penetrate further down into the root zone.
Once you dethatch and aerate your lawn, it is ready for reseeding and fertilizing. The removal of thatch, coupled with the puncture holes from the aeration process, will allow new seeds to grow well and give your lawn a full, lush appearance.
Grass doesn’t grow particularly well if it doesn’t have enough sun. If parts of your lawn are always shady, you may have noticed that the grass is a little thinner. If you have many trees that are blocking the sun, consider trimming them back if at all possible.
A common mistake that people make when trying to improve their lawn is to water too frequently. Yes, plenty of water is important to the successful growth of your grass, but it can also lead to shallow rooting.
As we have learned, there are a wide variety of factors impacting how golf course superintendents are able to keep golf greens grass so short.#N#It starts with the construction of the green itself, the selection of the proper grass variety for the climate, appropriate maintenance and watering techniques, and hiring qualified mowers who can operate precision machinery for the right outcome.#N#The result is a smooth surface every golfer can love.#N#Perhaps you are interested in a job as a greenskeeper.#N#With a golf management degree from the College of Golf you can get started on a path to career you’ll love. Contact us today .
Specific grasses were tested and used on putting greens due to their characteristics and suitability for growing at shorter heights. Moving forward there are many factors that contribute to putting greens maintenance.
Up until the middle 1800s, putting greens were simply grass that was shorter due to sheep grazing there longer. Lawnmowers had not been invented yet. Greens were not specially built nor were they planted with specific grasses. They were selected because the spot was the right distance from the tee box, and the ground offered a natural shape that provided a reasonable surface for putting.#N#That all changed with the invention of the lawnmower. Then greenskeepers began to shape the putting green distinct from the surrounding area. They were contoured and graded in order to provide different challenges depending on where the hole was. Specific grasses were tested and used on putting greens due to their characteristics and suitability for growing at shorter heights.#N#Moving forward there are many factors that contribute to putting greens maintenance.
Today, science has advanced considerably in the construction of greens.#N#A modern green is really a large hydroponic system.#N#Construction starts with digging a hole the size of the green between 12 and 16 inches deep. #N#This hole is lined with a layer of plastic and then covered with gravel.#N#Drainage channels and sand are added.#N#Specialists then contour the surface to ensure rainwater runs off quickly and evenly, leaving no puddles behind.#N#All of this must be built in an area with lots of sunlight and free flow of air.#N#Once in the right grass seed is selected, the green needs lots of water and nutrients.#N#These days, greens keepers also use:#N#-Fungicides that keep diseases from overtaking the grass.#N#-Pesticides to prevent damage from invading insects.#N#-A number of different herbicides to kill weeds.#N#After the green has flourished, maintenance is key.#N#The green must be mowed every day with a special mower.#N#Workers must water and fertilize it constantly, adding the right mix of the above chemicals and aerating it on a regular basis.
The soil of each of the 18 different greens on a course varied widely in their quality. Some could hold water well, and others had much more soil than others. Some drained well while others did not.
These days, greens keepers also use: -Fungicides that keep diseases from overtaking the grass. -Pesticides to prevent damage from invading insects. -A number of different herbicides to kill weeds. After the green has flourished, maintenance is key. The green must be mowed every day with a special mower.
To keep the grass so short on greens, special mowers are used. Golf course mowers are reel mowers, not rotary like most lawn mowers used at home. The reel spins and cuts the grass like a tight scissor cut. The cut height is set by adjusting the difference between the front and rear rollers.
On a golf course putting green, the cutting height should be no greater than 0.189-inch! In all truth, that is rather tall to maintain a firm smooth surface. Additionally, on a golf course, grass is mowed almost every day and sometimes more than once a day with a reel mower. The original labor for mowing golf course greens actually came ...
Rolling is an odd-looking mechanical practice for the non-turfgrass junkie to wrap their head around. Rolling results in many benefits, but none more practical than it creates a smooth surface that results in longer ball roll and increased customer satisfaction.
Choosing a pattern- Golf greens are mowed front to back, side to side, left to right and right to left. The left to right and right to left cuts are angle cuts. Envision a square in which you start at the bottom right corner and move to the top left corner.
The tee boxes and the greens are mowed this way. The greens specifically are mowed every single morning starting around six AM. It is a tedious and precise process but if done correctly can yield beautiful results for those playing that day. This is a seven step process to aid in the green mowing process. 1.
Checking for grass build up in the bucket- There is a bucket attached to the front of the mower which catches the cut grass. It is critical to keep an eye on this bucket while mowing. Often one will have to stop at least once while mowing a green to empty this bucket.
It is all preference but the key is to keep the clutch engaged and mower moving. If one were to let go of the clutch then the mower comes to a halt and that’s not fun as one will most likely walk right into the mower. Cutting of straight lines is not an easy task. It requires focus the whole way through.
The clean up pass- The last step in mowing a green is to do a clean up pass once one has completed all the back and forth passes possible. The clean up pass requires following the edge of the collar around the green with the mower.
Once this step is complete you can step back and enjoy your handy work! Mowing a golf course green may look easy but in fact involves many steps, in which none can be forgotten about. It is rewarding when completed as you can admire your straight lines for the rest of the day. It is also a great form of exercise.
The most common form of damage to a golf green will be divots, and this will require repair. Divoting. With golfing often divots are left on the surface after play. It is vital that these divots are tended to maintain an even surfaced and weed free green. Divoting is one of the most regular methods of maintenance on any course ...
Pitch marks are caused by a golf ball landing on the grass from a high trajectory. If not repaired they can affect the quality of the playing surface and stress the affected areas of turf. They can be easily fixed with the use of a pitch mark repairer. Aside from divot repairs and pitch mark repairs, all golf greens become worn when played on ...
Aside from divot and general wear and tear repairs, you may need to overseed your greens due to the some of the following issues: Thin or patchy grass cover. Compacted ground which indicates by poor drainage, high weed content, moss and poor grass growth.
Aeration. Soil compaction, preventing the flow of oxygen and nutrients throughout your soil can cause grasses to die back and thin or bare areas will appear particularly on greens and tees.
This can be done by hand or a machine known as a turf cutter.
Turfing. This can be done by hand or a machine known as a turf cutter. This method is used to remove damaged areas, turf contamination such as oil spillages from machines or simply to allow access to a burst irrigation pipe etc. Plugging / patching.
Thatch (a layer of dead grass, debris, moss) will greatly affect your greens drainage and irrigation. Thatch retains moisture leaving your greens more susceptible to disease and also allows annual meadow grass (Poa Annua) to creep in.
In Memphis, the greens were mowed for the first time about five to six weeks after sprigging. Collins says play can usually begin 90 to 100 days after sprigging. Then, at last, it’s time to tee it up.
Here is a look inside the process to prepare greens at Overton Park. 1. Smoothing things out. Most of the greens at Overton Park were not particularly smooth after sitting out in the elements for a few weeks. There were low spots from rain, bulldozer tracks and windrows over much of the surface.
Keying in greens is Collins’ least favorite part of the entire construction process. The good news is we didn’t have to do this all the way around every green. Keying in a green is done before laying sod around the perimeter, usually in a spot with lots of slope that could force a washout on the green if left alone.
Sand gets pushed around the 4th green at Overton Park in Memphis. Ed note: GOLF contributor and architecture nut Desi Isaacson is cutting his design teeth as an intern for King-Collins Golf on their redesign of Overton Park , a nine-hole muni in Memphis, Tenn.