why wont my ras course load

Try logging out and back in, then launching your course again. This can sometimes be caused if your session expired. Make sure your browser is properly configured for our courses.

Full Answer

Why is my course not loading or displaying?

If you have followed the steps above and the course still will not load, or displays as a blank screen, please follow the steps below: Click on the lock icon on your top left of the browser. 2. Choose Site settings 3. Change all the 3 items: JavaScript, Images, and Popups and redirects, to Allow

Are there any problems with previous versions of Ras mapper?

Reported problems with previous versions can be seen by choosing the Versions drop down in the upper right corner of this page. At some junctions, editing and saving the Geometry from RAS Mapper causes the junction lengths to be recomputed and replaced with new values. Save Geometry from Mapper Changes Lateral Structure HW Connection Settings

What can I do if an online course will not launch?

– Fred Pryor Seminars & CareerTrack What can I do if an online course will not launch? There are many web browser settings that can affect how courses launch. Here are some steps you can take to ensure your experience is not interrupted: Step 1: Verify that your "pop-up blocker" is not blocking the course.

What if the course does not show as completed in Red Cross?

Even if the course does not show as “completed” in the Red Cross Learning Center, instructor trainers will still be able to close the blended learning class and issue certificates after completing the in-person portion of the course. Students must use one of the following supported browsers in the Red Cross Learning Center:

Why does RAS Mapper crash?

What happens when you rename a 2D area in RAS?

Why does a hydrograph plot crash?

What does initial condition point mean in hydrograph plotter?

Does RAS use rasterized terrain?

Is the optional precipitation ratio specified in the Unsteady Flow Data editor being applied?

Does HEC-RAS compute reach lengths?

See 4 more

About this website

How do I reset my Ras tool?

How to restart RAS serviceOpen the Services app, click Start and type Services.Find Remote Access Connection Manager.Right-click and choose Restart.

Why is my VPN not working at home?

Failure to connect to the internet with a VPN is often caused by firewalls, blocked ports, outdated VPN software, or simply a failure of your router. Make sure that your firewall allows for use of the VPN, that your VPN software is updated, and that the right ports aren't blocked.

How do I fix my VPN always?

Possible cause. This error occurs when the VPN tunnel type is Automatic and the connection attempt fails for all VPN tunnels. Possible solutions: If you know which tunnel to use for your deployment, set the type of VPN to that particular tunnel type on the VPN client side.

How do I set RAS?

To install the Remote Access role on DirectAccess servers Click Next three times. On the Select role services dialog, select DirectAccess and VPN (RAS) and then click Add Features. Select Routing, select Web Application Proxy, click Add Features, and then click Next. Click Next, and then click Install.

Why is VPN not connecting?

If your VPN software is not working properly, you can do several things: check your network settings, change your server, make sure the right ports are opened, disable the firewall, and reinstall your VPN software. If none of the below methods are working, it's time to contact your VPN provider.

Can Wi-Fi block VPN?

Some Wi-Fi networks do not allow VPN connections and restrict VPN access using network or firewall settings. If this error appears when you connect to Secure VPN for the first time, it could be due to the network or firewall settings.

How do I test if my VPN is working?

The easiest way to check if your VPN is working is to note your IP address before connecting to a VPN, and then to check the IP address again immediately after the VPN connection is established.

How can I check my VPN connection status?

To check your VPN connectivity, simply check the status of your IPv4 address. If it matches the location of your VPN server, it is working. You can check the IP address of the VPN server you are currently connected to by visiting WhatIsMyIP.network.

How do I give permission to VPN?

Android VPN permissions problemOn your device, you should navigate to Settings and select Network;Then navigate to the VPN category and tap the options icon next to the installed VPN apps on your device;So if the Always-ON option would be enabled, you will need to disable it.

Why does VPN not work on school Wi-Fi?

Almost all school network administrators block VPN access for students. To know for sure, check to see if your school has an "Acceptable Use Policy" on websites or proxies. If your school has only blocked certain websites like Facebook, you can use Hotspot Shield to access those sites.

How do I fix my VPN on my iPhone?

How to fix a VPN not working on your iPhoneForce restart your phone.Update/re-download your VPN app.Try another VPN server.Check for account issues.Check your VPN account for issues.Reset your Wi-Fi settings.Reset your phones IP address.Manually set your VPN's DNS.

Why is my VPN not changing my location?

Reboot and try again. If the IP address is from another country, but not the one you selected, your VPN may be at fault. Close and restart your client, connect to several servers and verify their location with the iplocation.net (opens in new tab) site. Report any variations to your VPN.

Why does my VPN keep connecting and disconnecting?

If your VPN keeps disconnecting and reconnecting, it's likely that data packets are being lost or blocked between your device and the VPN server. This could be due to issues with the VPN client, your router, or your network connection.

Troubleshooting With HEC-RAS

Chapter 11 Troubleshooting With HEC-RAS 3. Increasing order of station for cross sections, bridge deck/roadway, and abutments. 4. Data consistency checks (i.e., when the main channel bank stations

Troubleshooting With HEC-RAS

Chapter 11 Troubleshooting With HEC-RAS C H A P T E R 11 Troubleshooting With HEC-RAS For a steady flow analysis, the HEC-RAS software is designed to continue its computations all the way through completion, even when the user has entered

HEC‑RAS Cross Section Geometry Requirements - Knowledge Base on CivilGEO

This article discusses the requirements for HEC‑RAS cross section placement, spacing, layout, geometry and other data. Boundary geometry for the HEC‑RAS analysis of flow in natural streams is specified in terms of ground surface cross sections and the measured flow distances between them (reach lengths).

Internet connection

Please check that your device has a stable internet connection by running a speed test, then wait for the results to load.

Device

Some devices may not display or perform well on a mobile device. If so, please access this course on a desktop computer instead.

Browser and browser settings

For the best learning experience, we recommend using Google Chrome as your web browser on your desktop or laptop device.

Scroll down and change the Active Scripting setting

Scroll down to the section titled " Scripting ". There is a sub-section called " Active scripting ". Click the option " Enable " to enable Javascript. Press the " OK " button to save this change.

Confirm the change

Because you are changing an important setting, Internet Explorer will prompt you to confirm that you really want to do this. Press the "Yes" button to confirm this change.

Close "Internet Options"

You are now returned to the original " Internet Options " window. Press the " OK " button to close it and return to your normal web browsing.

STEP 1

Open Safari and click on the Safari menu and go down to 'preferences...'.

STEP 3

Make sure the 'Enable JavaScript' checkbox is ticked and the 'Accept Cookies - Always' option is selected.

STEP 4

Now that you have completed these steps click the Close button at the top of the window.

What happens when you zoom out on a course?

When zoomed in or out on your browser, sometimes the controls for the player or other buttons (such as the Continue button) can be cut off at the bottom. You should try changing your zoom levels to see if the course controls return.

What to do if you increase resolution?

If you increased the resolution, close the course and then re-launch it to apply the new display settings.

Is Flash required for Skillsoft?

Skillsoft has made updates to all of our active courseware to ensure Flash is not a requirement, and all retired courseware which may have a dependency on Flash is being removed from our sites. Please reach out to your Training Coordinator for additional information.

Does Skillsoft use Flash?

Skillsoft has been working to ensure all clients utilizing custom courses that have a dependency on Flash are either updated or removed from client sites. Please reach out to your Training Coordinator for more information.

What to do if your classes are not showing on Redcross?

If your classes are not showing on www.redcross.org/takeaclass, please contact the Training Support Center by creating a support case at https://www.redcrosslearningcenter.org/ s/create-a-case .

Why is there an error message on Red Cross Learning Center?

Some instructors/providers have received this error message when trying to access the Red Cross Learning Center. This is due to increased activity on the website. The vendor is working to resolve the issue as quickly as possible.

How to remove instructors from Red Cross?

Please review your instructor list in the Red Cross Learning Center by clicking ‘Resources/Manage Instructors.’ The instructors listed will be able to set up and report courses, including selecting purchase orders when closing classes. Click the ‘Add or Remove Affiliation’ button and complete the form to remove any instructors who should not be affiliated with your account. You can also request to add instructors to affiliate to your organization.

How to access progress report on Water Safety Instructor?

To access the progress report, students should click the award icon on the top right of the screen ( within the Water Safety Instructor Course).

What is the red button on the training support center?

The Training Support Center is experiencing higher than normal call and chat volume. Your inquiries will be addressed as quickly as possible. If you try to use the ‘Click to Chat’ button on the Instructor or Partner Portals, please note when the Training Support Center has reached the maximum number of chats to which they can respond, the button is ‘grayed out’ or is not visible. When an agent becomes available, the button appears ‘red.’

What happens if a student doesn't use a supported browser?

If the student is not using one of the supported browsers, they will not be able to consume the course.

Can you use direct links for classes?

Instructors/providers have the option to use Direct Links for certain basic-level classes. Once the class is completed enter through Course Record Entry. See the Direct Links Resource Guide for instructions, courses and course links. The Direct Links platform is separate from the Red Cross Learning Center and provides access to online content only. Instructors are not able to track completion status of students. Instructors must provide access to course materials.

What does it mean when an activity is not marked as practice?

If an activity is not marked as either Practice or Counts Towards Grade, it does not count toward the final grade.

Can you read access codes after scratching off a card?

The access codeon a physical access card is not readable after scratching off the film covering the code.

Have a Canvas Question?

Ask your Canvas questions and get help from over a million Community members from around the world.

View All Groups

February 16, 2022 How do you — How do I — in the Instructure Community? Ideas

Featured Partners

Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.

Life hack army edition, 38 years and an officer pension GUARANTEED

Gather around young soldiers and read this short path to a cushy retirement at 38.

No one cares about what you did yesterday

I am on a post filled with retired CSMs that can’t let go of their past. They introduce themselves as CSM retired blah blah blah. They wear masks with CSM rank on it. Some of them even go so far as to embroider “CSM (ret).” On their polo shirts.

Can we get an F in chat for 2CR as they go through this difficult time

Investigators are still around as far as I know, but apparently unknown individual (s) came into the regiment HQ and made off with the US and German flags and housted in their stead 2 confederate flags. Laudy daudy everybody is now on lock down over their. Was expecting some of the signal troops today but I am guessing that is not going happen.

Why does RAS Mapper crash?

Attempting to sanitize an infiltration layer will cause RAS Mapper to crash. For now sanitize the dependency layers, such as soils and landcover individually

What happens when you rename a 2D area in RAS?

If a 2D area is renamed in RAS Mapper, the boundary conditions for the 2D area are lost and the user has to reenter the boundary conditions in the Unsteady Flow Data editor .

Why does a hydrograph plot crash?

Datasets containing gates will cause the Hydrograph plot to crash if more than one plan is selected.

What does initial condition point mean in hydrograph plotter?

Initial Condition Points will show "No Data for Plot" in the new Hydrograph Plotter. Work around is make an identical reference point at the initial condition point and plot that instead.

Does RAS use rasterized terrain?

This will make RAS use the standard rasterized terrain approach for computing face profiles.

Is the optional precipitation ratio specified in the Unsteady Flow Data editor being applied?

The optional precipitation ratio specified in the Unsteady Flow Data editor is not being applied. The only work around is to modify the precipitation data directly.

Does HEC-RAS compute reach lengths?

HEC-RAS does not compute the reach lengths correctly to weight the uniform lateral flows in Quasi-Unsteady if there is a structure in the sub-reach. It can compute an inflow that does not sum to the user specified inflow over all cross sections. And if there is a sediment rating curve attached, it does not always bring in the expected sediment (since sediment load is function of flow). This was fixed for 6.2.