where to buy 3/4 inch course gravel

What size gravel is 3/4 inch?

Size #57 is another of the more popular gravel sizes. This particular size of gravel ranges in diameter from 3/4th of an inch (1.9 centimeters) to 1 inch (2.54 centimeters) in diameter. This gravel is often used for paving walk or driveways, at it can be walked and driven on with relative ease.

What sizes do gravel come in?

What Size Does Gravel & Stone Come In?Small Gravel. Soil scientists separate gravel materials into two groups. ... Large Gravel. Large, or coarse, gravels range in size from 19 mm to 64 mm. ... Cobble Stones. Cobbles, ranging in size from 64 mm to 256 mm, are a size larger than coarse gravel. ... Boulder Stones.

What is the cheapest gravel for landscaping?

These are the top three commonly used cheap rocks for landscapes and their costs: Crushed Granite - $50 to $70 per cubic yard. Pea Gravel - $25 to $67 per cubic yard ($2 to $3 per bag) River Rocks - $50 to $160 per cubic yard ($0.05 to $0.35 per pound)

What is 3/4 inch drainage stone?

3/4" Drainage Gravel Gray Stone is a crushed angular Limestone or granite aggregate, depending on location. This most popular and common gravels as it has a wide range of applications.

What size is #4 gravel?

1 to 2 ½ inch#4 Description 1 to 2 ½ inch sized stones or roughly golf ball to egg size material. Generally used as a base material and topdressed with smaller stones or used as a decorative cover material that will not be walked on.

What size is #11 gravel?

Crushed natural limestone is ideal for pathways, driveways, compacting or top dressing when a smaller stone is appropriate. INDOT #11 Crushed Limestone is also widely used in concrete mixes that require a smaller stone.

How thick should landscape gravel be?

2 inchesFor most purposes, 2 inches (or 50mm) of landscaping rock is adequate. If you use a material that is larger than this, then the depth will be the same size as the rocks themselves. That is, you will want one layer of 3 to 8 inches (75 to 200mm) of rocks.

What area will 1 ton of gravel cover?

100 square feetUnderstanding Size and Coverage Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

What area does a ton bag of gravel cover?

Based on our 20mm sized stones, 1 bulk bag of gravel will cover approximately 12 sqm at 50mm depth for paths and driveways. Alternatively, 1 bulk bag will cover approximately 16 sqm at 30mm depth.

What size is type 2 gravel?

Type 2 gravel is a combination of small stones (no more than 1.5” in diameter) and stone dust typically used in the construction industry. It is not used as a decorative or landscaping material.

What size are drainage rocks?

Common Drain Rock Features This style of stone comes in a few common sizes: 1 1/2 inch, 3/4 inch, 7/8 inch, or 3/8 of an inch. This smallest size is sometimes called pea gravel as well.

What is the best type of gravel to use for a driveway?

Among the other options are crushed stone #411, quarry process, pea gravel, jersey shore gravel, marble chips, and river rock. These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.

Kitsap County Including

Bainbridge Island, Breidablick, Bremerton, Brownsville, Camp Union, Chico, Crosby, Gorst, Hansville, Holly, Illahee, Indianola, Keyport, Kingston, Lofall, Manchester, Nellita, Olalla, Port Gamble, Port Orchard, Poulsbo, Seabeck, Silverdale, Southworth, Sunnyslope, Suquamish, Tracyton, Union

Pierce County Including

Arletta, Artondale, Canterwood, Crescent Lake, Edgewood, Fife, Fircrest, Fox Island, Gig Harbor, Home, Key Center, Lakebay, Lakewood, Longbranch, Milton, Point Fosdick, Purdy, Puyallup, Raft Island, Richmond Point, Rosedale, Tacoma, University Place, Vaughn, Wauna, Wollochet

Mason County Including

Allyn, Belfair, Dewatto, Fair Harbor, Grapeview, Harstene Island, Little Hoquiam, Mason Lake, Stretch Island, Tahuya, Treasure Island, Union, Victor

Don't see your neighborhood?

We will occasionally make deliveries beyond these areas for specialty rock and flagstones. E-mail us to ask about availability in your area. Contact Us.

What size is gravel?

Gravel sizes range from 0.1"-10" in diameter and between 0.5"-1.5" on average. Choose from either sharp crushed stone that's been mechanically broken up or water-worn river rock with smooth edges.

How much does gravel cost?

Gravel costs $0.50 to $2.00 per square foot, $40 per yard, or $30 per ton on average. White or black colored gravel such as ballast lime-rock, white limestone, or lava rock costs $120+ per ton, or $3 to $10 per cubic foot when ordered in small quantities.

How many square feet does a ton of pea gravel cover?

When laying the recommended gravel-layer depth of 4", then a ton of pea gravel covers an area of 40 to 50 square feet. Spreading out 1-ton of gravel at 2" deep covers 80 to 100 square feet, while 6" deep covers 25 to 35 square feet or less if you use larger stones.

How much does bluestone gravel cost?

Crushed bluestone gravel rock costs $52 per ton or $74 per yard when picked up from a local quarry. Prices can double when you include delivery charges. Larger sizes of decorative-quality bluestone gravel cost up to $155 per cubic yard or $109 per ton when you purchase at least 5/8 of a cubic yard from a quarry.

How much does crushed rock cost?

Crush and run gravel costs $24 to $34 per ton, about $50 per cubic yard, or $0.50 to $2.00 per square foot, which is one of the cheapest materials. This mixture combines limestone, trap rock, granite, crushed rock, sand, and stone dust. It's also known as crusher run, quarry process, #411 gravel, road stone, or dense grade aggregate.

How many yards of crushed stone per 100 square feet?

Gravel can also be used as a base for roads, ground cover, or landscaping material. Estimate 3.7 cubic yards of crushed stone per 100 square feet of coverage 12-inches deep (cubic foot).

How much does it cost to haul a truck load of gravel?

A truck load of gravel costs $1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for $46 per hour that spread 12 cubic yards per hour.