If an approaching car is using its high-beams, don't look directly into the oncoming headlights—look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on.
Full Answer
The head of driver training program for AAA says that one reason why flashing your lights at a driver using their high beams is a bad idea is that they may be driving under the influence, and may not be seeing clearly. Lights flashing at them is only going to compromise their vision more.
High beams should be used cautiously. However, many drivers use them whenever they’re on a poorly lit road, regardless of their blinding effect on oncoming traffic. The initial reaction to seeing someone with their high beams on is to flash their headlights to try to alert the other driver to switch to their low beams.
The low-beam mode produces a less intense light that provides a nighttime down-the-road view of about 200 to 300 feet, or the approximate length of a football field. It may seem like a lot, but if you're traveling at 60 mph, it takes just 3.4 seconds to cover that distance.
That's because high-beams are aimed higher, plus their brighter light bounces off the fog, raindrops, or snowflakes suspended in the air as if they were millions of tiny mirrors. The light is reflected into your eyes rather than down the road, reducing your visibility.
If an approaching driver is using their high beam headlights, you...Look directly at the headlights.Flash your high beam lights to remind the driver to switch to their low beams.Pull to the side of the road until the vehicle has passed.
High beam headlights should be used at night, whenever you're unable to see enough of the road ahead to drive safely. Low visibility at night can be scary for even the most experienced drivers.
At night, within how many feet of approaching a vehicle from the rear must you dim your high beam headlights? Drivers are required to dim their headlights when approaching an oncoming vehicle within 500 feet or when approaching the rear of a vehicle within 300 feet.
DrivingQuestionAnswerWhen driving on a highway at night, you should never use you high beam headlights if you are...following another carIf it starts to drizzle while you are driving, you should...slow down because the rain will loosen oil and gravel on the road and allow at least twice the normal following distance19 more rows
If an approaching car is using its high-beams, don't look directly into the oncoming headlights—look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on. If you do, both of you may be blinded.
Your headlights only let you see about 350 feet ahead. Be sure you are driving slow enough to stop or turn if needed. Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet.
You must dim your high-beam lights when within: 500 feet of an oncoming vehicle.
Explanation : To help avoid the glare of approaching high beams, shift your eyes to the right. Use the road edge as a guide until the approaching vehicle passes by. 24.
A simple solution is to look down toward the right side of the road to avoid getting blind momentarily. Concentrate on the edge of the lane or the painted edge line until the vehicle passes. 6. Keep your eyes moving and try not to focus on the middle area illuminated by your headlights.
Explanation If an approaching driver fails to dim their high beams, glance toward the right side of the road. This will keep you from being blinded by the other vehicle's headlights and will allow you to see enough of the road to stay on course until the other vehicle has passed.
Get your lights sortedYou must have your headlights on if you're driving between 30 minutes after sunset until 30 minutes before sunrise. ... When you're following another car, keep your headlights on low (not full beam). ... You must also dip your lights if you've stopped on the side of the road.More items...
Avoid looking directly at the headlights of oncoming traffic. Instead, look down and to the right. You should be able to gaze at the white line on the side of the road or where the pavement meets the shoulder. Use the right side of the road for tracking your lane instead of the left side.
If, however, you're on the highway or a lonely rural road with no traffic within 500 feet, go ahead and blast the high-beams for better visibility. Their extra range makes higher-speed driving safer, because you can see farther ahead. There's less chance of "overdriving your lights." But also be aware that your brights can reduce the visibility of and annoy drivers in cars you are following, as your brights are reflected off their rearview mirrors and into their eyes. So as you catch up to cars ahead, dim your high-beams as a courtesy.
And second, motor-vehicle laws in most states require you to switch off your high-beams and refrain from flashing your high-beams within 500 feet of other traffic.
That's because high-beams are aimed higher, plus their brighter light bounces off the fog, raindrops, or snowflakes suspended in the air as if they were millions of tiny mirrors . The light is reflected into your eyes rather ...
And second, it's not safe, because we share the roadway with other drivers.
High for higher speeds and highways, but only when you can maintain at least 500 feet between your vehicle and the rest of us. And thank you for doing so.
The light is reflected into your eyes rather than down the road, reducing your visibility. In the higher-density traffic and lower speeds of urban and suburban streets , the low-beam setting gets the job done and reduces the possibility of making other drivers and police uncomfortable.
It may seem like a lot, but if you're traveling at 60 mph, it takes just 3.4 seconds to cover that distance. Your high-beams, which are typically activated either by pushing or pulling the turn-signal stalk, are more powerful: They project light about 350 to 500 feet, depending on your lighting system's specifications.
Question: One of the dangers of night driving is that darkness impairs your ability to judge distances, movements, and colors.
A. One car length for every 10 miles of speed
D. Both a and b are correct
Safety belts and airbags together offer the best protection in a collision
Road signs use color and shape to help you identify the type and purpose of the sign
Your risk of being injured or killed in a collision decreases as your defensive driving behaviors increase
Driving aggressively is taking control of the situation at hand
Combining visual, mental, and physical distractions while driving can be deadly. True. Sleeping for less than 8-9 hours a night interrupts your circadian rhythms and impairs cognitive performance.
Your attitude toward other drivers and driving usually indicates what your behavior will be when you are driving. Therefore, what are your attitudes
Improper driving is the single most common cause of motor vehicle collisions
Road signs use color and shape to help you identify the type of purpose of the sign.
If an animal suddenly appears on the road in front of us, experts advise swerving to avoid hitting the animal.
The first two stages of a collision are 1) the Vehicle Crash and 2) the Human Crash. What is the third stage of a collision?
A.) Stopping distances decrease when driving at night.
A.) About every two hours or one hundred miles
A.) There are more careless drivers on the road at night