Answer:Always remember that the coarse adjustment knob should only be used with the lowest power objective lens. Once it is in focus, you will only need to use the fine focus. Using the coarse focus with higher lenses may result in crashing the lens into the slide.
What should you always remember when you use the coarse adjustment? You should always remember when you use the coarse adjustment to used to focus the microscope but only used it with the low power objective. Under what conditions would you adjust the diaphragm?
When in high power, use the fine adjustment (the knob smaller than the coarse adj.) to more accurately focus on the subject. What is coarse adjustment knob?
you may need to make it brighter what should you always remember when you use the course adjustment only used with low power under what conditions would you adjust the diaphragm change intensity and size of light
You should always remember when you use the coarse adjustment to used to focus the microscope but only used it with the low power objective. Under what conditions would you adjust the diaphragm?
Coarse and fine adjustment The coarse adjustment knob should only be used with the lowest power objective lens. Once it is in focus, you will only need to use the fine focus. Using the coarse focus with higher lenses may result in crashing the lens into the slide.
COARSE ADJUSTMENT KNOB — A rapid control which allows for quick focusing by moving the objective lens or stage up and down. It is used for initial focusing.
Your microscope slide should be prepared with a coverslip over the sample to protect the objective lenses if they touch the slide.Do not touch the glass part of the lenses with your fingers. ... Always keep your microscope covered when not in use.Always carry a microscope with both hands.
The coarse adjustment knob is used ONLY with the low power (4X, 10X) objectives. When focusing under the 40X or 100X objective, ONLY use the fine adjustment, never the coarse adjustment.
Viewing Prepared Slides Place a slide on the stage, label side up, with the coverslip centered. On LOW POWER ONLY, use the coarse focus knob to get the object into focus. If you cannot see anything, move the slide slightly while viewing and focusing. If nothing appears, reduce the light and repeat step 4.
' Coarse adjustment, using the coarse adjustment knobs, raises and lowers the stage more rapidly. Fine adjustment knobs are the smaller knobs and are also used to raise and lower the stage but more slowly and in a more controlled manner under higher magnifications.
What should you always remember when you use the coarse adjustment? You should always remember when you use the coarse adjustment to used to focus the microscope but only used it with the low power objective.
Here are nine tips to help you remember what you have to say.Use the Palace Method. ... Use mind maps. ... Know the value of focusing for eight seconds. ... Practice the 20-20-20 rule of rehearsal. ... Rehearse out loud. ... Practice to music. ... Record your presentation. ... Rehearse before bedtime.More items...•
Always place the 4X objective over the stage and be sure the stage is at its lowest position before putting the microscope away. 9. Always turn off the light before putting the microscope away. 10.
USE OF THE COARSE ADJUSTMENT MAY DAMAGE THE SLIDE AND THE LENS! You should notice that you can see the object, but it may be slightly out of focus.
NEVER USE THE COARSE FOCUS KNOB ON HIGH POWER! The high power lens should be very close to your slide when in proper focus. If you turn the coarse adjustment knob while on high power, the objective could easily break your slide.
The body tube of the microscope should not be lowered while looking through the ocular lens because you do not want to lower the body tube too much and have it crack the slide. to move the body tube in order to focus on the specimen.
The coarse adjustment knob on most microscopes is along the lower middle part of the arm of the microscope as shown in the image below.
The basics of using a microscope tells us that we should start with the lowest power objective first and with the stage at its lowest position.
If your eyepiece (s) on your microscope is built facing away from the arm of the microscope then turning the knob away from you will raise the stage and turning the knob towards you will lower the stage.
Some microscopes will come with a tension adjuster. This allows you to manipulate the tension of the adjustment knob to determine how soft or how hard do you have to turn the knob to attain the desired level of movement from each revolution of the knob.
Knowing the difference between fine adjustment and coarse adjustment knobs on the microscope is an integral part of focusing the microscope.
An important thing to remember as you turn the high power objective into place , it is retractable, when you hit a slide, the end of the len s will push in (spring loaded) thereby protecting the lend and the lens.
Always remember when handling the microscope slides was slide it at the end AND never viewed it without the coverslip