Soldier course: Rectangular pavers are laid with the short sides together for a strong and clean border. Sailor course: Rectangular pavers are laid lengthwise in one or multiple rows. Inlaid borders: Contrasting borders are laid further inside the field pavers for a striking look.
Jan 03, 2020 · Soldier course is the term for laying a row of pavers side to side, perpendicular to the rest of the field, which is a common border treatment. Alternately, your contractor may mention a “sailor course ,” which would be a border course that is …
Definition of Soldier Course in Construction. Identification of a course of bricks that are installed in a wall vertically. The orientation of the bricks are installed to expose the long narrow side of the brick to make them stand in a row, similar to soldiers. In many cases the soldier course is used as an accent band within a masonry facade, or as a decorative head detail for a window or door.
Jun 16, 2020 · The "soldier course" is the rectangular blocks that "stand" on their short end to make the border. The all go in one direction along each edge, no matter what the field pattern is. A quick DuckDuckGo search for "paver soldier course" got me this image: Source: Western Interlock. No endorsement intended or implied
Edge courses can be formed using, for example, dished channels or even linear drains, but, in most cases, standard blocks will be used, and so, by laying these on a concrete bed and haunch, their role in directing surface water and generating the correct falls within the body of the pavement can be assured.
The laying course material is not contained, and can escape by being washed out by groundwater, for example. In many cases where the edges of a block pavement have collapsed, as in the photo above, it is because the edge blocks were laid on a sand bed and the haunching was a token gesture at best.
Edge courses are the blocks, bricks or other paver units used at the edge of a pavement. Sometimes referred to as Soldier Courses, their main function is to provide a robust restraint for the paving, to prevent it spreading and losing its load-bearing capability.
As a retaining structure: This is the primary function of the edge courses, yet, on many pavements, the edge courses are not actually a retaining structure at all, but are included for one or more of the other reasons given above. A good example of this is when the edge course lies against a wall or a kerb.
Eliminate cuts at pavement edge. This function of an edge course is fairly self-explanatory. By using full blocks (or other units) to form the edge course, there is no risk of having small or cut pieces of paving at a free edge, where they are more likely to work loose.
A standard mitre. And when two soldier courses meet at a 90° corner, then they should be mitred to form a neat corner detail. The mitre shown in the photo on the right only works with 90° angle, although it can be adapted for use with angles from 70° to 110°. For other angles, standard mitres (left) are preferred.
A triple stretcher edge course. Edge courses wider than 200mm are generally better suited to larger projects, such as car parks or small access roads, where they invoke the memory of the standard 3-sett channel that is found on many sett or cobble pavements.
Soldier course is the term for laying a row of pavers side to side, perpendicular to the rest of the field, which is a common border treatment. Alternately, your contractor may mention a “sailor course,” which would be a border course that is laid end to end parallel to the field. Secondly, do I need edging for pavers?
Secondly, do I need edging for pavers? Do use edge restraint – yes you need it! If pavers are not restrained they will slowly “creep” into the softer surrounding materials and large gaps between the pavers will appear around the perimeter of the area. Also, what is a sailor course?
If pavers are not restrained they will slowly “creep” into the softer surrounding materials and large gaps between the pavers will appear around the perimeter of the area. Also, what is a sailor course? Sailor A sailor course is similar to the soldier course but with the wide edge facing out.
The orientation of the bricks are installed to expose the long narrow side of the brick to make them stand in a row, similar to soldiers. In many cases the soldier course is used as an accent band within a masonry facade, or as a decorative head detail for a window or door.
The soldier course will fall into coursing by matching with three courses of a running bond or commonly laid brick. In many instances the soldier course is doubled or tripled to create a wider band of dissimilar laid brick in the facade. Architects may chose to change the coloration of this band.
A soldier course is when you lay a row of pavers side to side, perpendicular to the rest of the field. In other words, you lay the long sides next to each other, and the short sides are touching the fieldstones.
An alternative to a soldier course is the sailor course. You lay this course end-to-end parallel to the field. In other words, the short sides are next to each other, and the long sides are touching the fieldstones.
Border: The outermost edge of your hardscape. Often laid to enhance hardscape design and tie in the fieldstones. Fieldstones: The primary hardscape area. Pattern: The design and layout of your paving stones. This term can describe both borders and fieldstones.
The first step to designing a border for pavers is to choose colors that complement each other. Here’s how we think about this: you can lay a consistent border or a contrast border. Both need to complement your hardscape.
Often laid to enhance hardscape design and tie in the fieldstones. Fieldstones: The primary hardscape area. Pattern: The design and layout of your paving stones. This term can describe both borders and fieldstones.