First, check ADD EDGING option and change the dropdown from NONE to ALL SIDES and the Soldier Course Distance to 0′ 6″. Next, we move the cursor to the drawing and click on Curve #1, Curve #2 and Polyline #3. Once we have all clicked, we right click and the soldier course is applied and the paver is created.
Full Answer
There are a couple methods to add a soldier course around a paver area. In the posting we are going to use the Paver Edge and Create Paver From Edges tools to add a soldier course to a paver area. These tools were added in version 17 and 18. First, we draw in the framework for the area using the Draw >> Paver >> Edge tool.
No endorsement intended or implied I'd suggest that you'll want to start with the soldier course of 6x9s to outline your paver area, then lay the field. You'll need to measure (or do a test layout along each edge) to see if you need to cut any blocks at any of the borders.
The "soldier course" is the rectangular blocks that "stand" on their short end to make the border. The all go in one direction along each edge, no matter what the field pattern is. A quick DuckDuckGo search for "paver soldier course" got me this image:
If you do the field first, then get to the soldier course, you may discover that you need to cut the soldiers and that will look odd.
0:083:10How to install a soldier course border on a paver or brick patio walkway NJYouTubeStart of suggested clipEnd of suggested clipAround this corner of the Belgium block you can see here and we scored a mark with a cut-off sawMoreAround this corner of the Belgium block you can see here and we scored a mark with a cut-off saw right there now to make this precise. And on point we actually take these pavers.
0:101:17AZEK Standard Soldier Course Paver - YouTubeYouTubeStart of suggested clipEnd of suggested clipOf these innovative pavers these pavers are sold individually. And are available in full and wedgeMoreOf these innovative pavers these pavers are sold individually. And are available in full and wedge options the wedge paver reduces the need for cutting. And it also allows for great flexibility.
3:588:51How to Lay a Curved Paving Stone Walkway - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe chose to lay downhill. Because we wanted to avoid a lot of cuts at the top of our project you canMoreWe chose to lay downhill. Because we wanted to avoid a lot of cuts at the top of our project you can do that as well you just want to make sure that you tap your stones. And keep them straight.
0:207:13Chapter 12 | Marking & Cutting - Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we'll set the tool to the length of our soldier course paver. Make a small mark on the side ofMoreAnd we'll set the tool to the length of our soldier course paver. Make a small mark on the side of the paver to be thrown away so the person on the saw knows which piece to discard.
Soldier: A soldier course is one in which brick are laid standing on end with the narrow edge facing out. This type of course is sometimes used for decorative effects over door and window openings and in fireplace facings (vertical, long, narrow).
7:4811:46How to Prep and Build a Paver Patio with Curves and Border \\ DIY ProjectYouTubeStart of suggested clipEnd of suggested clipAnd the easiest way I found of doing that just to score the paver with the grinder about a half inchMoreAnd the easiest way I found of doing that just to score the paver with the grinder about a half inch of three-quarter inch down.
2:0613:00CURVED PATH SETTING OUT. - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown we made this. And then i just got my got my trowel stick it to the side of there pull thatMoreDown we made this. And then i just got my got my trowel stick it to the side of there pull that today and just draw a line all the way around you've got to keep this kind of parallel.
Mark the template with a sharp pencil to the required curve with a slight over hang and cut with sharp scissors, replace the template and lightly mark the template cut and recheck the template, move the template to the paving slab and position correctly and mark the paving with one slow continuous crayon line.
0:193:01PaverSCRIBE | PAVE TECH - Hardscape Outfitter - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou guys will take a pair of tape measures. And measure the distance at the halfway point. AndMoreYou guys will take a pair of tape measures. And measure the distance at the halfway point. And measure the distance. At the edge of the paver.
Adjust the drill to the fastest drill speed.Mark the drilling location on the concrete paver.Hold the drill as vertical as possible. ... Flip the paver over once the pilot bit of the hole saw has completely drilled through the paver. ... Clean the concrete dust off the paver with a vacuum.
5:5020:35BRICKLAYING - How to build a CURVED BRICK WALL - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically what you do is you mark all of them out and cut each individual one so that you knowMoreBasically what you do is you mark all of them out and cut each individual one so that you know exactly which ones are going to go in.