Cheapest gravel for driveways. The cheapest gravel for driveways is crusher run, crushed shells, crushed concrete, slate chips, recycled asphalt, and pea gravel, which all cost $15 to $30 per yard, or less than $1 per square foot when purchased in bulk from a quarry.
How much area does 5 tons of gravel cover:- typically, 5 tons of gravel will cover approximately 540 square feet or 60 square yard or 50 square metres area for standard 2 inch depth. A ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sq ft coverage.
These are the top three commonly used cheap rocks for landscapes and their costs:Crushed Granite - $50 to $70 per cubic yard.Pea Gravel - $25 to $67 per cubic yard ($2 to $3 per bag)River Rocks - $50 to $160 per cubic yard ($0.05 to $0.35 per pound)
These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.Crushed Stone #411. It is crushed up #57 stone combined with rock dust. ... Quarry Process. ... Pea Gravel. ... Jersey Shore Gravel. ... Marble Chips. ... Blackstar or Blacktrap Rock.
A standard sized dump truck is always recommended for your project. It can carry about 10 to 14 cubic yards of dirt or 12 cubic yards of stones or 15 yards of topsoil or 22 yards of mulch or 16.5 yards of gravel per truckload.
Typically, larger dump trucks can carry about 28,000 pounds or about 14 tons. On average, smaller dump trucks can transport around 13,000 to 15,000 pounds or 6.5 to 7.5 tons.
Crushed concrete, sand and gravel mix, and crushed shells are the cheapest stones at $15 per yard. Crusher run, pea gravel, steel slag, and river rock typically cost $50 per yard or more.
0.66 cubic yardsCubic Yard is also called Yard only. The number of cubic yards in a ton of gravel = 2000/ 3000 = 0.66 cubic yards. Hence, there are 0.714 cubic yards in 1 ton of gravel.
Installing gravelscape costs $7-8 per square foot, while replacing a lawn with an IdealMow lawn alternative will cost $6-12 per square foot, depending on the specific grass of interest.
Driveway Layers A gravel drive should have a first layer of baseball-sized stones at least 4 inches deep. According to Tim Carter of AskTheBuilder.com, each layer thereafter should be 4 inches thick and in gradually smaller stone.
Add Chip Seal. Consider adding chip seal to the surface of the driveway to bind the loose stones. With a proper road base, you can add this gravel driveway hardener, which is a combination of hot tar and aggregate that seals the surface of the driveway.
Divide the measurement in inches by 36 to find the driveway's depth in yards. Most driveways should have a depth of 6-8″ of gravel. The formula to find volume is length × width × depth. Multiply the width by the length by the depth in yards to find the cubic yards of gravel needed.
Complete installation of a gravel driveway starts at roughly $0.75-$3 or more a square foot, or about $300-$1,000 for a 12'x25' single-car driveway, 4"-8" thick. Prices can double for a roadway-quality gravel driveway, or $450-$1,800 for 12'x25' and $11,000-$60,000 or more for a driveway 12' wide and a quarter-mile long.
Gravel can be used as ground cover; as a base for roads, driveways, walkways or patios, or on its own as both base and surface material for paving projects.
The average cost of class 5 gravel, as per our research, is about $7 to $15 per ton. The costs, ultimately, will depend on the company you purchase it from and the amount purchased at once. If you order class 5 gravel in bulk, for instance, you can usually ask for a discount.
1 cubic yard of gravel will weigh anywhere between 2,400 to 2,900 pounds or up to one and a half tons.
Last Updated: August 15, 2018. Class 5 gravel is crushed limestone – a mixture of sand and small rocks – which compacts nice and hard. It’s commonly used for roads, parking lots and driveways.
Minus crushed rock is less expensive, ranging from about $12-$35 per cubic yard in rural areas and $15-$75 in cities.
As a basic guideline, one cubic yard Crushed rock covers about 324 square feet, one inch deep. Similarly, it covers 162 square feet, 2 inches deep. You have to figure out the size of the area that you want to cover with Crushed stone to place an order and get pricing. Typical Cost of Crushed Rock Delivery.
It also well suited for decorative pathways, walkways, plant beds and flower beds. If you do not know anything about crushed rocks or gravel stone and unsure of which type to buy, ask a landscaping professional, particularly if you have problems related to poor drainage, muddy conditions or erosion.
On the other hand Clean crushed rock does not have the smaller pieces of rock, dirt or sand. It comes mostly in 1/4 inch sizes and all are usually same size.
Because clean crushed rock does not pack down tightly or stick to the base ver well, it is not ideal as a base or in concrete mixture. But it is suitable for new driveways or those with drainage problems. It also well suited for decorative pathways, walkways, plant beds and flower beds.
Middle layer: 2” to 3” stone is spread to a depth of 3-4 inches. 2” to 3” stone layer: $0.35-$0.45 per square foot. Top layer: Road gravel, crushed stone or pea stone is spread to a depth of 2-3 inches.
Replacing an old asphalt or concrete drive with gravel doesn’t happen often, but if that’s what you’re doing, the cost will be the highest among the scenarios. Heavy equipment is used to break up the existing material and load it into trucks. It is then hauled away for disposal or recycle/reuse.
That said, as with every type of driveway, the final price you pay will be dictated by the amount of preparation and work to be done. Replacing an existing gravel driveway will be much cheaper than removing an old concrete driveway before laying gravel.
The amount of gravel required for a given project is dependent on what the project is. The calculator above can be used to estimate the amount of gravel necessary given a number of factors. Note that the price estimate provided by the calculator is solely an estimate based on the cost of materials.
Gravel is a widely used commercial product that has a number of applications ranging from decorative purposes to large-scale construction, such as roads. Gravel and sand in billions of tons are produced for construction purposes worldwide each year.
There are many different types of gravel. Generally, gravel is categorized based on the size of the individual rock fragments that make up the gravel, as well as how the gravel is procured or produced.