how many routers are there between wrk1 and wrk3? course hero

How to choose the right router for You?

5 Use the tracert command from Wrk1 to answer the following questions: How many routers are in the path between Wrk1 and Wrk3? What is the default gateway address for Wrk1? What is the IP address of the last router in the path between Wrk1 and Wrk3? Click the Done button when you have found the information you need to answer the questions.

What is a single band router and why does it matter?

Dec 6, 2019 - Easily completed these tasks! 1. Enable Remote Desktop, and allow the Mark account to connect using a Remote Desktop connection. 2. Configure the Local Area Connection network connection with static IPv4 address information for the /24 subnet: Use the last valid address on the subnet for the host address. Use the first valid address on the subnet for the …

Do I need to be close to my router to use WiFi?

Apr 08, 2020 · testout. Use the ipconfig and tracert commands from Wrk1 to answer the following questions: What is the default gateway address for Wrk1? What is the IP address of the last router in the path between Wrk1 and Wrk3? Click Done when you have found the information you need to answer the questions. Computer Science Engineering & Technology Networking.

How do you connect multiple servers to one router?

A hub connects Wrk1 and Wrk5 to the switch. The switch has the following information in its CAM table: the switch. The switch has the following information in its CAM table: Port Port Device Device Fa0/1 Fa0/1 Wrk1 Wrk1 Wrk5 Wrk5 Fa0/2 Fa0/2----Fa0/3 Fa0/3 Wrk3 Wrk3 Fa0/4 Fa0/4----Wrk1 sends a frame addressed to Wrk5. What will the switch do ...

What is the purpose?

The purpose of this lab is to help you understand internetwork security, backup and restore operations, disaster prevention, and recovery of data.

What is the purpose?

The purpose of this lab is to use troubleshooting techniques to isolate, diagnose, and resolve network communication problems.

Did it work?

Were you able to use the appropriate command, ping or tracert, to successfully troubleshoot connectivity problems?

What is WPA2 router?

WPA2 is the current security encryption standard for Wi-Fi routers and should be the minimum you look for when choosing a router. This can protect you from most attempts to access your network but won’t be enough to block determined professional hackers or backdoors caused by careless online behavior. Stay vigilant!

What frequency does a dual band router support?

Dual-band routers support the 2.4GHz and 5GHz frequencies as we described above. Tri-band routers add one more 5GHz frequency that is used for data transfers between the different nodes of your mesh router system to alleviate congestion on the 5GHz frequency.

What is a single band router?

Why it matters: Single, dual, and tri-band refers to the frequency channels of a router. Single band routers operate at a lower frequency — on the 2.4GHz band — which has fewer channels and is therefore more crowded. In fact, most household appliances — such as your microwave, cordless phone, bluetooth devices — also operate on this frequency. Dual band routers support both 2.4GHz and 5GHz frequencies. The 5GHz band is capable of transmitting more data at higher speeds, but has a hard time routing around walls and furniture and can’t travel as far. Tri-band routers support a third band on the 5GHz channel, 5.8GHz.

What is the key to knowing when buying a new router?

All three are WiFi protected access protocols, which encrypt your network and require that outside devices — and hackers — have a “key” to gain access.

Which band is capable of transmitting more data at higher speeds?

The 5GHz band is capable of transmitting more data at higher speeds, but has a hard time routing around walls and furniture and can’t travel as far. Tri-band routers support a third band on the 5GHz channel, 5.8GHz.

Which is better, WPA or WEP?

How to choose: WEP is considered outdated and a piece of cake for any basic computer hacker to crack. WPA is better and more secure than WEP, but most experts and service providers recommend WPA2 security. Luckily, most modern routers are equipped with this protocol, but double-check for this when making your decision.

Which is faster, 802.11n or 802.11ac?

How to choose: While some households can operate successfully on 802.11n, most consumers should use the newest standard, 802.11ac. This standard is faster and transmits more data, since it utilizes both the 5GHz and 2.4GHz bands.

Do I need a new router if my WiFi goes out?

If you perform a rain dance every time your WiFi goes out, it might be time for a new router. But understanding whether your router is up to par, or knowing what to look for in a new purchase, is much easier said than done. In addition to the perplexing industry terms like 802.11ac, dual band, and Mbps, routers look more like alien spaceships than technology for the home — leading you to wonder if you really need six external antennas. (The short answer? Nope.)