For those dog owners who are handy, you can easily make your own dog agility seesaw, using 2x4's for the base and a 2x12 for the plank itself. A little sawing, hammering and painting is all it takes to complete a basic see saw, which you can use for years to come.
Full Answer
What is the Best Flooring for Dog Agility Training at Home?
To be eligible to compete in Agility, your dog must be:
You just need a harness, a 20- to 40-foot lead, a few flags to mark your track, and an open grassy area free of obstacles such as roads, ditches or woods. Before you enter a Tracking Dog Test (TD), you must have the dog certified by an AKC-approved or provisional judge. This certification form must accompany the entry form.
What You Need to Know Before You Start Agility Training
0:374:56Teach your dog the See-Saw | Zac & Lucy's agility - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to start off what you want to do is just get the seesaw plank and lay it flat on the ground withMoreSo to start off what you want to do is just get the seesaw plank and lay it flat on the ground with your dog on the lead just calmly walk past the plank and get your dog to walk on the plate.
0:333:37How to Make a Custom Training Platform for Your Dog. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe supplies that we'll be needing to build two of these platforms is going to be a 1 4 by 4 8 footMoreThe supplies that we'll be needing to build two of these platforms is going to be a 1 4 by 4 8 foot piece of lumber cut into 11 inch pieces. 4 1 by 3 8 foot white wood boards.
Enhance your purchaseColorBlue, YellowBrandBetter Sporting DogsTarget SpeciesDogProduct Dimensions72"L x 12"W x 12"H
Agility Seesaw Dimensions The required length of an agility seesaw ramp is 12 feet, according to the United States Dog Agility Association's regulations.
Instruction Steps:Build the A-frame climbing wall. Use a table saw or circular saw to cut two 4′ x 8′ sheets of plywood down to 3′ x 8′. ... Add wooden rungs to the wall. Wooden rungs will aid your dog's traction as he climbs the A-frame. ... Paint the A-frame wall. ... Finish the A-frame wall.
The A-frame in an agility course The A-frame consists of two wide planks (36” wide and 9' tall) that are propped up at an angle, creating the characteristic “A” shape. A-frames are typically blue and yellow, with the contact zones (the zones a dog has to touch) at either end being about 42” wide.
3:247:47Make Your Own SeeSaw! - YouTubeYouTubeStart of suggested clipEnd of suggested clipHappens to be an inch and a quarter. So I'm going to drill an inch and a quarter hole right thereMoreHappens to be an inch and a quarter. So I'm going to drill an inch and a quarter hole right there and I just measured down two inches from the top and then I centered it from side to side.
Product Description. This dog agility teeter (see-saw) has a board that is 8' long and 10" wide. The base can be adjusted to be either 12" or 18" high.
12 feet longIt needs to measure 12 feet long and the base has to extend 2 inches past the sides of the plank with a gap that should not exceed 4 inches. When measured from the top of the board at the pivot point it has to be 24 inches, with the allowance to take an inch or 2 more or less, but no further.
24 inches apartAll agility organizations have very specific guidelines for the weave poles. There are always 12 poles, spaced 24 inches apart. The dog of course has to navigate them in a zig-zag pattern. However, not just how to wiggles through the poles is crucial, but also how he enters them.
60" teeter length. 12" teeter width. 18" frame provides support. The center point of teeter and center point of the frame are the same.
24"While 22" and 24" spacing is allowed in all agility competitions: USDAA, AKC, NADAC, CPE, DOCNA and UKI, 24" spacing is recommended by all of them.
0:001:37PVC Dog Hurdle Jump - DIY Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut for 12 inch sections to 35 inch sections and to 45 inch sections. Next dry fit the structure ofMoreCut for 12 inch sections to 35 inch sections and to 45 inch sections. Next dry fit the structure of the hurdle jump place the 12 inch sections in the 4 way to use facing opposite directions.
Getting a Platform The rule of thumb is: It has to be big enough for your dog to turn around and lie down if you want her staying there. The easy way — measure the floor space while she is lying down. Height can be around 12 inches or as low as a mat for seniors.
2:568:59How To: DIY Agility See-Saw | TheDogBlog - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to need two pieces of PVC. Cut into 20 centimeter length. And last but not least fromMoreYou're going to need two pieces of PVC. Cut into 20 centimeter length. And last but not least from uprights you're going to need 2 PVC pieces. Cut into 35 centimeter length.
0:565:32How To: DIY Agility Dog Walk | TheDogBlog - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to need eight pieces of PVC. Cut at 15 centimeters you're going to need four elbowMoreYou're going to need eight pieces of PVC. Cut at 15 centimeters you're going to need four elbow joints. And eight t pieces. Okay. So what you're going to do first is grab two T pieces.
1. Cut a piece of 2 by 12 in (5.1 by 30.5 cm) wood to make the seesaw plank. The planks for an official dog agility seesaw are usually 12 feet (3.7 m) in length. Purchase a long 2 by 12 in (5.1 by 30.5 cm) plank of wood online or from your local hardware store.
To keep your seesaw visually interesting for yourself and your dog, choose a color that contrasts with the paint for your contact areas to cover the rest of the board. Use latex or oil-based paint that is waterproof, applying a thin coat to the plank with a paintbrush or roller.
Moving the fulcrum of the plank closer to one end will make sure that the longer side always sits on the ground when the seesaw isn't in use.
Most standard dog agility seesaws make the contact area bright yellow so that dogs can see it more easily. To keep the lines between the contact area and the rest of the seesaw straight, wrap the edge of your contact area with masking or painter's tape.
This should create a single seesaw base. The fulcrum with the seesaw board will sit between the 2 uprights.
Your stands will need to be almost perfectly identical. If they are too different, your seesaw may not sit evenly on the base, or it may break more easily.
The size of the contact area on each end of your plank varies between different dog agility associations. Measure the length of an appropriate contact area from each end of your plank and mark it with a pencil line.
Step. 1. Place treats around the seesaw. Your dog should be rewarded for exploring the area around the seesaw to begin with. Don’t touch the seesaw and just scatter treats around the base to get him used to the obstacle being there. Step. 2. Place treats on the lower part of the seesaw.
With the exit point of the seesaw already on the ground, place your dog a few steps away from the exit by lifting her up and onto it and then rewarding for proceeding down to the exit.
The trickiest of the agility obstacles is the seesaw, or teeter-totter, which is a tilting platform that a dog must ascend upwards, find his pivot point, tip the seesaw, and then exit the bottom of the other end.
Lift the entry point a few inches above the ground. Place more treats along the entry ramp and gently lift that side of the seesaw so that it’s a few inches off the ground. Encourage your dog to continue taking the treats. Step. 5.
Since you’re working backwards, you’ll continue to place your dog a little bit higher on the exit ramp of the seesaw each time. Use a treat at the exit contact point to ensure she touches it before hopping off. Step.
Be cautious if ever trying to build one yourself, as it must be safe for your dog to walk on and operate. Regulation agility seesaws should be 12 inches wide and 12 feet long, with the center point being 24 inches above the ground.
Whether it’s a handful of yummy treats or playtime with a favorite toy, be sure to reward your dog for a job well done at the end of the session.
Use two weights to slow the descent of the board when a dog is on it. To make them, fill 12-inch lengths of pipes with gravel and cap both ends. Attach the weights as close to the end of the entry side as you can without raising the board off the ground. Secure the weights with metal strapping and 3/4-inch sheet-metal screws.
To create space for the head of the bolt to sit flush with the top of the plank, remove the strap and drill one-quarter the depth of each hole using a drill/driver fitted with a 5/8-inch paddle bit. Drill the rest of each hole with a 3/8-inch bit.
Tap the pipes tight into the tees using a block and a hammer. Drill a hole through the tee into the pipe using a drill/driver fitted with a 1/16-inch bit. Connect the two with a 1-inch set screw.
Photo by Wendell T. Webber. This jump bar helps Fido build up his hindquarters and develop a better sense of boundaries. It also helps breeds that are prone to hip problems (such as Labs and German shepherds) improve strength and agility.
Doing a balancing act on a teeter-totter helps dogs gain confidence and trust your commands —particularly "come," "stop," and "stay"—as you help them over it.
Agility training is a healthy and enjoyable experience for pet owners and their dogs to share. It builds a dog's fitness, mental skills and confidence while also strengthening the bond between pet and owner. With the broad assortment of TRIXIE agility products you can set up courses customized for your dog's unique skill and fitness level.
Each order comes with 1 x Trixie Dog Activity Agility Seesaw, 300 × 54 × 34 cm