The 40-hour HAZWOPER course is formatted to work around your busy schedule. The course is taken online and is compatible with a desktop, laptop, tablet or even a smartphone. You can even switch between devices as you go, and your progress is saved right where you left off, allowing you to stop and start as needed.
The 40-hour HAZWOPER course explains a wide range of health and safety topics relevant to hazardous waste operations, including:
Who Needs HAZWOPER Training? The OSHA HAZWOPER training requirements, under 29 CFR Part 1910.120, apply to employees who may be exposed to hazardous substances on-the-job and who also engage in hazardous waste operations such as clean-up, treatment, storage and disposal, or emergency response.
There are three training categories:
HAZWOPER is an acronym that stands for Hazardous Waste Operations and Emergency Response. According to OSHA standard 29 CFR Part 1910.120, HAZWOPER training is required for any workers who perform cleanup, emergency response, or corrective actions that involve the uncontrolled release of hazardous substances.. Exposure to hazardous chemicals can cause a variey of health and safety risks ...
between 36 to 42 hoursMore specifically, employers and employees alike often ask how long it takes to complete the HAZWOPER 40 online training course. The “40” in HAZWOPER refers to the number of hours needed to complete the certification. Most 40-Hour HAZWOPER training courses will take between 36 to 42 hours to complete.
The course consists of no fewer than 81 interactive modules, each accompanied by a brief quiz, and concludes with a final exam. The quizzes are for practice only and a failed quiz does not count against you. Students will train on the HAZWOPER Hands-on Simulator®, the only training simulator to be accepted by OSHA.
HAZWOPER training prepares cleanup and emergency response workers to operate safely during a variety of scenarios involving hazardous substances. This training covers policies, practices and procedures that reduce the risk of injury and illness related to harmful exposures on the worksite.
Course Quizzes and Final Test The quizzes and test are not designed to be difficult, but rather are necessary to help ensure the trainee is actively participating in their online 40 Hour HAZWOPER course.
The terms “HAZWOPER” and “HAZMAT” are often used interchangeably. While closely related, these words actually carry different meanings. HAZWOPER generally refers to the act of handling, packaging, storing and transportation of hazardous materials while HAZMAT typically refers to the materials themselves.
$249.99 / personCost: $249.99 / person The OSHA 40 Hour HAZWOPER Training is the standard requirement for general site workers who are engaged in hazardous materials removal or other activities which could expose or potentially expose them to hazardous substances necessitating an emergency response.
At the top of the hierarchy are the trainer cards which reflect the highest level of achievement and proficiency. Trainer card. Signifies authority to teach 10- and 30-hour outreach courses and receive OSHA student completion cards.
HAZWOPER aims to prevent and minimize the possibility of worker injury and illness resulting from potential exposures to hazardous substances. Exposures to hazardous substances pose a wide range of acute (i.e., immediate) and chronic (i.e., long-term) health effects.
A HAZWOPER physical or HAZWOPER exam is like most medical surveillance exams, with special attention on how potential overexposure is impacting different parts of the body.
The problem is that HAZWOPER training isn't just any normal class – it's mandatory! And if you fail? It could result in being issued a hefty fine, or even losing your job altogether.
50 questionAfter the curriculum has been completed and the student answers the practice questions at the end of each module, the final 50 question exam will be made available. 80% of the exam questions are taken directly from the study questions at the end of each module.
The employer is responsible for risk assessments within a workplace, meaning that it is their responsibility to ensure it is carried out. An employer can appoint an appropriate individual to carry out a risk assessment on behalf of the organisation, as long as they are competent to do so.
This online course satisfies OSHA's 40-hour HAZWOPER training requirement. It is fully narrated and contains interactive exercises and real-world examples. You have an unlimited number of attempts to pass each module quiz and the final exam, which require a score of 70% or higher.
How Long Does HAZWOPER 40 Certification Last? The 40-hour HAZWOPER certification remains valid for 12 months. To maintain your certification, you are required to complete an 8-hour HAZWOPER Refresher course each year. If you miss the deadline, you may be required to retake the 40-hour course.
This online HAZWOPER course provides 40 hours of training on OSHA Hazardous Waste Operations and Emergency Response (HAZWOPER) standards. The course satisfies training requirements outlined in OSHA standard 29 CFR Part 1910.120, which requires workers to complete HAZWOPER training before starting work at an uncontrolled hazardous waste operation.
Most workers who are new to uncontrolled hazardous waste or emergency response operations are required to complete 40 hours of HAZWOPER training. This includes general site workers (such as laborers and equipment operators) and on-site management and supervisors. Roles that require this training may include:
The 40-hour HAZWOPER course explains a wide range of health and safety topics relevant to hazardous waste operations, including:
According to OSHA standards, HAZWOPER training applies to workers and employers involved in five specific types of operations: Corrective actions involving cleanup operations at Resource Conservation and Recovery Act (RCRA) sites.
Course benefits include: Guaranteed to pass. OSHA-authorized training with access to a course trainer for questions.
Of the various types of HAZWOPER training courses available we’ll look specifically at the 40 Hour HAZWOPER Training Course to understand its value in the workplace.
OSHA regulations require that general site workers and supervisors must receive 8-hours of refresher training annually to maintain their initial 24- or 40-hour HAZWOPER certification.
On the other hand, OSHA 40 Hour HAZWOPER Training Certification pertains to general site workers engaged in work operations that could expose or potentially expose them to hazardous substances and health hazards at, or above, OSHA’s PELs or Published Exposure Limits. Therefore, workers are required to use appropriate respiratory protection.
Apart from the difference in time duration to complete the training course, the 24 Hour Course is designed for workers who are on-site for a specific limited task or a temporary assignment. These workers are unlikely to be exposed to hazardous substances at or above OSHA’s permissible exposure limits (PELs) or published exposure limits, and therefore do not require respiratory protection.
The specific provisions for the 40 Hour HAZWOPER Training can be found in 29 CFR 1910.120 (e). The goal of this course is to educate workers about subjects like hazardous chemicals and their properties, as well as the selection and use of appropriate personal protective equipment (PPE). The 40 Hour HAZWOPER Training also provides workers ...
There’s no doubt, effective HAZWOPER training is crucial to the safety of workers engaged in operations and activities at a hazardous waste facility. With plenty of benefits, the 40 Hour HAZWOPER Course is of critical importance for these workers as it provides a wealth of information about essential safety and health topics ...
either 24- or 40-hour HAZWOPER training. Additionally, supervisors must also receive 8-hours of specialized managerial training. OSHA regulations require that general site workers and supervisors must receive 8-hours ...
The HAZWOPER 40-hour course has been reviewed and accepted by OSHA for online distribution.
Please note that 8 hours of hands-on training is required for the 40 hour Hazwoper course and can be completed by a qualified instructor. The three days field experience under a trained, experienced supervisor is the responsibility of the student’s employer or potential employer.
HAZWOPER 40-hour is required for workers that perform activities that expose or potentially expose them to hazardous substances.
Workers must have 40 hours of initial training and at least three days of supervised field experience before they are allowed to enter the site.
Our comprehensive 40-Hour HAZWOPER course reviews a variety of topics that relate to Hazardous Waste Operations and Emergency Response (HAZWOPER), including site characterization, hazardous chemicals, radiation hazards, personal protective equipment (PPE), and decontamination methods.
Our 40-Hour HAZWOPER online training is ideal if you are exposed (or potentially exposed) to hazardous waste and substances at work. Particularly, the training is a must if you're an emergency responder or you clean, store, dispose, or treat hazardous materials.
Additionally, no matter which course you take—40-Hour or 24-Hour, you will still need to complete the 8-Hour HAZWOPER course every year.
Yes. At the beginning of the course, there is a section devoted to the 2013 the Hazard Communication Standard (HCS) changes to align with the Globally Harmonized System of Classification and Labeling of chemicals (GHS), which is the universal approach to classifying chemicals and communication of hazard information through labels on chemicals and Safety Data Sheets (SDS).
OSHA is very clear that initial HAZWOPER 40 training can’t be handled entirely online. Your employer has to supplement this course with: Supervised Personal Protective Equipment (PPE) practice with the respirators and full protective gear.
OSHAcademy has divided the 40-hour HAZWOPER program into ten courses. Each course has a minimum time requirement, which must be met before a student is granted access to the course exam. After successfully completing each course exam, students are guaranteed to have met the 40-hour time requirement defined by OSHA.
All employees working on site (such as but not limited to equipment operators, general laborers and others exposed to hazardous substances, health hazards, or safety hazards and their supervisors and management responsible for the site shall receive training before they are permitted to engage in hazardous waste operations that could expose them to hazardous substances, safety or health hazards, as well as receive review training.
OSHA Standard 1910.120 requires students to complete 40-hours of off-site training as part of this program. OSHAcademy has divided the 40-hour HAZWOPER program into ten courses. Each course has a minimum time requirement, which must be met before a student is granted access to the course exam. After successfully completing each course exam, students are guaranteed to have met the 40-hour time requirement defined by OSHA.
This includes any employees who are exposed or potentially exposed to hazardous substances, including hazardous waste, and who are engaged in one of the following operations as specified by 1910.120 (a) (1) (i-v) and 1926.65 (a) (1) (i-v):
General site workers (such as equipment operators, general laborers and supervisory personnel) engaged in hazardous substance removal or other activities which expose or potentially expose workers to hazardous substances and health hazards shall receive a minimum of 40 hours of instruction off the site, and a minimum of three (3) days actual field experience under the direct supervision of a trained, experienced supervisor.
Trainees must have hands-on experience and exercises in the field to provide an opportunity to become familiar with equipment and safe practices in a non-hazardous setting. The purpose of hands-on training is two-fold: (1) to ensure workers can learn by practical experience and, (2) to assess whether workers have adequate skills. The employer is responsible for ensuring employees complete this phase of the HAZWOPER training requirement.
Corrective actions involving clean-up operations at sites covered by the Resource Conservation and Recovery Act of 1976 (RCRA) as amended (42 U.S.C. 6901 et seq.) Voluntary clean-up operations at sites recognized by federal, state, local, or other governmental body as uncontrolled hazardous waste sites.
The estimated time for this training is 4 hrs.
According to OSHA, all operators of heavy equipment must receive operator training . Proper training must include a classroom portion including a written exam, as well as a practical hands-on portion/exam wherein the operator is observed operating the machine. The online course satisfies the required classroom portion of the training. Upon completion of the course and written exam, the safety administrator of the company will receive a checklist which can be used to observe the trainee on the machine. When done successfully, the administrator signs the bottom of the form. At this point, unless further training is required by your employer, you have done everything required by OSHA to be considered by your employer as “certified,” “qualified,” or “competent.”
How does a Train the Trainer course work? 1. Take the online trainer course at your own pace (3 hours total is typical). Quiz questions along the way prepare you for the final exam. 2. Instant access to your safety certification, wallet card, and training kit materials (to use when training others) is granted once the online trainer course is completed and the subsequent online exam passed. 3. Congratulations! You've earned your lifetime trainer certification and may train your workers whenever you need. Additional Information
OSHA standards dictate that safety certification needs to be completed at least once every three years. Since no online course can provide “certification,” these courses will combine with your onsite practical training to fulfill OSHA’s requirements for up to three years. Having said that, refresher training is required sooner if an employee changes sites or jobs, is asked to operate a different type of the equipment, is involved in a near-miss or accident, or is observed operating the machine in a dangerous manner.
Our mission statement is to make safety training easy and affordable, and to invite companies everywhere to stop doing things the hard way and , instead, start doing them the Hard Hat Training way!
Yes, all of our Hard Hat Training online courses were built and continue to be updated by our trainers and inspectors using OSHA and ANSI guidelines. But it is important to understand that by OSHA-compliant, we mean it follows to the best of our ability the best practices and safety principles put forth by OSHA. In an online format, it is not possible to cover every code for every situation or hazard across every industry. For this reason, our safety training solutions are tools to further knowledge and help employers train and/or certify their crew. But just because a course or program is OSHA-compliant it does not necessarily mean a company as a whole will be compliant or avoid citation if OSHA were to audit them. There is so much more that goes into collective company compliance with OSHA. For example, workers need to be observed applying in the field what they learned in the classroom. This observation/practical exam should be done by trainers, supervisors, or other designated competent persons. Whether you use our training kits or online courses, we provide guides to help employers do this. Other things that need to be done for ultimate compliance may include but are not limited to: addressing with your crew any gaps in the training or additional hazards or principles specific to your work situation; creating, training on, and enforcing and abiding by written safety programs (also known as plans or procedures); and performing regular inspections and risk assessments.
When a course is assigned to an employee, only that employee can take the course. There are many reasons for this, but most importantly the course is designed to train that one employee per OSHA regulations. Also, there is a final written exam at the end that will be linked to the trainee assigned. OSHA requires proof of training and if multiple people were to sit in on that one course, they would not get credit for taking it.
When it comes to initial HAZWOPER training, there is both a 24-hour and a 40-hour course available.
As the name implies, the 24-Hour HAZWOPER course requires 24 hours of HAZWOPER training. All 24 hours of training may be conducted online. In addition to the 24 hours of online study time, a minimum of one day of field experience with a trained and experienced supervisor is required to cover on-the-job specifics.
The 24-hour HAZWOPER training course is designed for employees who will be working in the vicinity of hazardous substances and may occasionally be exposed to such materials but will not be faced with the daily hazards of handling or cleaning up hazardous materials. These employees will not be exposed to hazardous substances at or above the Permissible Exposure Limits (PELs). PELs are established by the Occupational Health and Safety Administration (OSHA) - See Table Z-1 for Limits for Air Contaminants.
40-hour certification requires employees to be able to physically wear a self-contained breathing apparatus (SCBA) and a fully-encapsulating suit.