during the course of consruction how frequently should combustible scrap and debris be removed

by Prof. Cleo Larkin 5 min read

Combustible scrap and debris shall be removed at regular intervals during the course of construction. Safe means shall be provided to facilitate such removal. Containers shall be provided for the collection and separation of waste, trash, oily and used rags, and other refuse.

Full Answer

What are the rules for the removal of combustible waste?

Combustible scrap and debris shall be removed at regular intervals during the course of construction. Safe means shall be provided to facilitate such removal. 1926.25 (c) Containers shall be provided for the collection and separation of waste, trash, oily and used rags, and other refuse.

What are the rules for debris removal in construction?

During the course of construction, alteration, or repairs, form and scrap lumber with protruding nails, and all other debris, shall be kept cleared from work areas, passageways, and stairs, in and around buildings or other structures. Combustible scrap and debris shall be removed at regular intervals during the course of construction.

How do you dispose of combustible scrap material?

Combustible scrap and debris shall be removed at regular intervals during the course of construction. Safe means shall be provided to facilitate such removal. Containers shall be provided for the collection and separation of waste, trash, oily and used rags, and other refuse.

What are the safety requirements for handling flammable liquids?

Before being able to work with flammable liquids, employees must receive training as to safe handling and use. To identify and control job site hazards, OSHA requires that employers conduct worksite analyses and periodic safety inspection programs that involve supervisors. Oily rags do not need to be separated from other non-hazardous waste.

When should scrap material be removed from the work area?

OSHA Construction Standard 1926.252(c) All scrap lumber, waste material, and rubbish shall be removed from the immediate work area as the work progresses.

How often must waste material susceptible to spontaneous combustion be removed from buildings and disposed of?

dailyRubbish and other combustible waste susceptible to spontaneous ignition, such as oily rags, shall be stored in a listed disposal container. Contents of such containers shall be removed and disposed of daily.

What is the OSHA standard for housekeeping?

No one OSHA standard addresses housekeeping, but many rules do include housekeeping provisions. Keeping everything clean and orderly is a project that's never finished, and some of the items that most frequently appear on facility inspection reports relate to poor housekeeping.

How are waste materials properly disposed of OSHA?

Disposal of waste material or debris by burning shall comply with local fire regulations. All solvent waste, oily rags, and flammable liquids shall be kept in fire resistant covered containers until removed from worksite.

How do you properly dispose of the materials?

Throw it in the trash with special treatment. Some hazardous household wastes are acceptable at landfills if special treatment is followed. Empty hazardous product containers should be rinsed several times before discarding in the trash.

How long may large quantity generators accumulate hazardous waste on site?

90 daysA large quantity generator (LQG) can accumulate hazardous waste on site for up to 90 days in specified units without obtaining a storage permit or interim status, provided the facility complies with Part 262 management standards for specific units (section 262.17Exit Exit EPA website).

How often should walking and working surfaces be inspected?

Inspection of walking-working surfaces (ยง1910.22(d)). The final rule requires that employers inspect walking-working surfaces regularly as needed and correct, repair, or guard against hazardous conditions; and.

Which of the following OSHA requirements mandates that employers must provide a place of employment that is safe and free from any sorts of hazardous conditions?

the General Duty ClauseEmployers have the responsibility to provide a safe and healthful workplace that is free from serious recognized hazards. This is commonly known as the General Duty Clause of the OSH Act.

What are the basic requirements of OSHA for employers?

Under the OSH law, employers have a responsibility to provide a safe workplace. This is a short summary of key employer responsibilities: Provide a workplace free from serious recognized hazards and comply with standards, rules and regulations issued under the OSH Act.

How often must waste material and debris be removed to a disposal and reusable material removed to storage area?

once daily(1) Waste material and debris shall be removed to a disposal area and reusable material shall be removed to a storage area as often as is necessary to prevent a hazardous condition arising and, in any event, at least once daily.

What is a debris chute OSHA?

OSHA regulates and mandates the use of a debris chute when there is a need to dispose of debris, trash, or waste materials from at least 20 feet of height. The chutes must be secured to the building to ensure their safety for workers on-site, passers-by, and properties around.

Which of the following is an OSHA guidelines for disposal of medical waste material?

Which of the following is an OSHA guideline for disposal of medical waste material? Dispose of chemicals in a glass or metal container. Dispose of sharp objects in a glass container. Licensed medical waste handlers are not necessary for medical offices.

How can you prevent a fire caused by spontaneous combustion?

Avoid this type of fire by following a few simple and proven tips: Store piles of hay, compost, mulch, manure, and leaves away from buildings, in case a fire occurs, and keep the piles small to allow for the circulation of air and the dissipation of heat.

How can humans prevent spontaneous combustion?

Avoid activities and diets which promote ketosis, the bodily state where levels of ketones -- like acetone -- are elevated. These include alcoholism, starvation, and diets based on low-carbohydrate and high fat/protein intake. 2. Avoid potentially dangerous sources of flame or high temperature, especially when drowsy.

Can wet cardboard spontaneously combust?

Carbon-based animal or vegetable oils, such as linseed oil, cooking oil, cottonseed oil, corn oil, soybean oil, lard and margarine, can undergo spontaneous combustion when in contact with rags, cardboard, paper or other combustibles.

Is an active principle of burning characterized by the heat and light of combustion?

Fire is the active principle of burning characterized by the heat and light of combustion. Fire is the product of oxygen, heat and fuel. Oxygen forms 21 percent of the air. The sun supplies heat naturally or artificially.

What is construction work?

For purposes of this section, "Construction work" means work for construction, alteration, and/or repair, including painting and decorating. (h) Defect means any characteristic or condition which tends to weaken or reduce the strength of the tool, object, or structure of which it is a part.

What is section 107?

By its express terms, section 107 applies to a contract which is "for construction, alteration, and/or repair.". Such a contract is not required to be exclusively ...

What is a confined space?

Confined or enclosed spaces include, but are not limited to, storage tanks, process vessels, bins, boilers, ventilation or exhaust ducts, sewers, underground utility vaults, tunnels, pipelines, and open top spaces more than 4 feet in depth such as pits, tubs, vaults, and vessels.

What is a subcontractor in construction?

Thus, a supplier of materials which will become an integral part of the construction is a "subcontractor" if the supplier fabricates or assembles the goods or materials in question specifically for the construction project and the work involved may be said to be construction activity.

What is Section 7 of the Service Contract Act?

Section 7 of the Service Contract Act provides that the Act shall not apply to "any contract of the United States or District of Columbia for construction, alteration, and/or repair, including painting and decorating of public buildings or public works.".

What is a contract under 107?

(1) is entered into under a statute that is subject to Reorganization Plan No. 14 of 1950 (64 Stat. 1267); and. (2) is for "construction, alteration, and/or repair, including painting and decorating.".

What is CFR 1926.2?

CFR# 1926.2 - Variances from safety and health standards. (a) Variances from standards which are, or may be, published in this part may be granted under the same circumstances whereunder variances may be granted under section 6 (b) (A) or 6 (d) of the Williams-Steiger Occupational Safety and Health Act of 1970 (29 U.S.C. 65).

What are the minimum safety requirements for a machine?

The minimum general safety requirements for machines include all these safeguards EXCEPT: Allow automatic start-up after power failures. Allowing automatic start-up of machines after power failure is not part of a general safety requirement, and may cause severe injuries.

How to protect workers from shock?

To protect workers from shock, electrical power tools must either be double insulated and: Have a three-wire cord with one cord going to ground . To protect a worker from shock, electrical power tools must have a three-wire cord plugged into a grounded receptacle or be double insulated.

How far away should you keep work rests on a wheel?

1/4. Regarding abrasive wheel work rests, keep work rests not more than 1/8th inch from wheel surface , and tongue guards at the top of the wheel not more than 1/4 inch from wheel surface. This prevents jamming the work between the wheel and the rest, which may cause the wheel to break.

What is the temperature of pyrophoric?

Pyrophoric means a chemical that will ignite spontaneously in air at a temperature of 130 degree Fahrenheit (54.4 degree Celsius) or below. Although all elements comprising a hazard warning label are important, the LEAST important element is the label's _____. Color.