course on how to do segmented woodturning

What are the secrets of Segmented woodturning?

Segmented WoodTurning (Secrets and Tips for the Beginner) 1. Know the difference between “segments” and “staves”. 2. Be able to identify the parts of a segmented ring. 3. Realize the required “width” of some segments will vary. 4. Keep the following formulas nearby for segmented woodturning. 5. Know how to compute the miter angle for segments.

How do you hold a woodturning tool?

Position the left hand so that the forefinger will be under the tool, resting against the side of the tool rest opposite the wood. The left hand's thumb will be on the top of the tool, helping to steady it against the forefinger and the tool rest. (See the image above for an example.) Left-handed woodturners will likely want to reverse the hands.

What skills do you need to become a woodturner?

One of the first and most critical skills a woodturner must develop is the ability to properly sharpen their tools. Properly sharpened gouges, skew chisels, parting tools, scrapers, and other lathe tools will cut cleaner and be less inclined to grabbing or gouging the wood stock being turned.

Can you use woodturning techniques for turning bowls?

The same woodturning techniques needed to turn spindles such as table legs, bed posts, stair rail spindles or finials can be applied to turning bowls, attractive pens, and more.

How do you make a segmented wood turn?

0:007:45How to Make Segmented Bowl Turning Blanks - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the width of the segments is what gives you the rough proportions for your bowl blank. But theMoreAnd the width of the segments is what gives you the rough proportions for your bowl blank. But the challenge to making these rings as you might guess is cutting these miter angles.

How do you make a segmented bowl on a lathe?

4:378:43Turning a Segmented Bowl on the Lathe - Cherry and SpectraplyYouTubeStart of suggested clipEnd of suggested clipSander then I put the bowl. With the last ring on the lathe. And turn it flat. So that I could glueMoreSander then I put the bowl. With the last ring on the lathe. And turn it flat. So that I could glue the next ring on top and then while that's drawing glue up the segment's to make the next ring and.

How do you layout a segmented bowl?

2:5813:09NO MATH: How to Design a Segmented Bowl: Day 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs far as the height. This is the base. And it goes all the way up to the tenth it rings if you needMoreAs far as the height. This is the base. And it goes all the way up to the tenth it rings if you need longer certainly you can go longer but these are three quarters of an inch apart.

How is segmented turn calculated?

7:4116:19Segmented Turning - Design and Determining Segment DimensionsYouTubeStart of suggested clipEnd of suggested clipAnd a half and how many rings you want to do how many segments in a ring somebody throw out a numberMoreAnd a half and how many rings you want to do how many segments in a ring somebody throw out a number 24 you would so I got 1 inch 2 inch 3 inch 4 inch 5 inch 6 inch 7. So you're almost an 8 inch ring.

What angle do you cut a segmented bowl?

The easiest way to calculate what angle each segment will need to be cut at is by using the below formula where n is the number of segments you're planning on using: =(360/n)/2. For example my bowl was an 8 segment one so 360/8 = 45, 45/2 = 22.5 degrees.

How do you make a segment jig?

1:029:09Woodworking | New Segmenting Jig - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt has a little groove right there on the back side of it. So you just slide that over slide itMoreIt has a little groove right there on the back side of it. So you just slide that over slide it right into the groove. And lock it. Down. So that part is done it's going to be eight segments.

How do you center a segmented ring?

2:418:03How to Center Segmented Rings with Claude Dupuis - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i set that at three and my compass at three and a quarter maybe go a tad bigger. And i've gotMoreSo i set that at three and my compass at three and a quarter maybe go a tad bigger. And i've got center and my ring is perfectly centered go back to my center point draw my circle.

How do you make a wedgie sled?

0:2613:51Wedgie/ Miter Sled (Free Templates) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can find a link to the original building plan from Jerry Bennett in the video.MoreYou can find a link to the original building plan from Jerry Bennett in the video.

How does a Longworth Chuck work?

0:031:10Modern Longworth Chuck (Woodturning) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe non-marking premium red silicone rippers expand when compressed to provide the ultimate grippingMoreThe non-marking premium red silicone rippers expand when compressed to provide the ultimate gripping. Power simply lay the piece on the Chuck gun rotate the plates in opposite directions.

Can you print bonus materials?

For any Bonus Materials element that is a PDF Download, yes you can. Found within the Bonus Materials tab, directly below the Class video frame, just click on the icon/button for any of the extra Class elements you want, download the asset, and print with your local printer.

Can you find all classes on Craftsy?

Also, if/when you are a Craftsy Premium Member, you will have access to all then-active Classes. In that case, you won’t find every Class in your MY ACCOUNT, but you can simply visit any Class page and enjoy the videos (be sure you’re Logged In as a Premium Member).

Can you access bonus materials on Craftsy?

Until you purchase a Class, or are a Craftsy Premium Member, the Class Bonus Materials ( any PDF download materials, etc.) will not be accessible. Once you purchase a Class or join as a Member, each individual bonus element is accessible by simply clicking on each item.

How to safely woodturn?

Hand Positioning. One key to safe woodturning is to keep your hands in safe positions that will control the tool, but keep the fingers clear of the action. For right-handed woodturners, the left hand will be against the tool rest and the right hand will be holding the handle of the tool. Position the left hand so that the forefinger will be ...

What skills do woodturners need?

One of the first and most critical skills a woodturner must develop is the ability to properly sharpen their tools. Properly sharpened gouges, skew chisels, parting tools, scrapers, and other lathe tools will cut cleaner and be less inclined to grabbing or gouging the wood stock being turned.

How to keep a woodturner from taking off?

Use the Bevel. One key to safe woodturning is to remember to always keep the bevel behind the sharpened edge of the tool resting on the wood. Following this rule will help keep the tool from taking too much off at one time, or worse, grabbing the wood and perhaps ripping the tool out of the woodturner's hands.

How fast does a lathe turn wood?

A variable speed lathe will typically turn the stock from about 500 RPM to a max speed of about 4000 RPM. A good rule of thumb is, "the wider the stock, the lower the speed."

Which hand is the thumb on a woodturner?

The left hand's thumb will be on the top of the tool, helping to steady it against the forefinger and the tool rest. (See the image above for an example.) Left-handed woodturners will likely want to reverse the hands.

When beginning to cut with a tool such as a gouge, while keeping the tool rest, what is the

When beginning to cut with a tool such as a gouge, while keeping the tool on the tool rest, lay the back edge of the tool onto the spinning wood so that the point of contact is on or behind the bevel, but that the tool's cutting edge is not yet cutting.

Can a scraper cut wood like a chisel?

However, a scraper should be used in exactly the opposite manner. A scraper doesn't cut like a chisel but works more like a butter knife.